Front bumper
Before restyling
Depending on the year of manufacture, the mounting locations differ.
Before restyling
Depending on the year of manufacture, the mounting locations differ.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
-open the hood.
-under the hood, Unscrew the four screws (twisted from top to bottom) that secure the upper part.
-Unscrew the four screws (twisted from bottom to top) that secure the lower part of the bumper.
-turn the wheels to the side.
-in the wheel arches we unscrew three screws and one on the bottom side that secure the fender liners (no need to remove).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the wings.
-under the hood, Unscrew the four screws (twisted from top to bottom) that secure the upper part.
-Unscrew the four screws (twisted from bottom to top) that secure the lower part of the bumper.
-turn the wheels to the side.
-in the wheel arches we unscrew three screws and one on the bottom side that secure the fender liners (no need to remove).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the wings.
-open the hood.
-under the hood, take out the pistons and Unscrew the screws that secure the upper part.
-around the perimeter of the lower part, unscrew two screws and take out seven pistons (twisted and inserted from bottom to top).
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel arches, unscrew two screws on each side and release the fender liners.
-release the latches in the wings (pull the corners toward you).
-under the hood, take out the pistons and Unscrew the screws that secure the upper part.
-around the perimeter of the lower part, unscrew two screws and take out seven pistons (twisted and inserted from bottom to top).
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel arches, unscrew two screws on each side and release the fender liners.
-release the latches in the wings (pull the corners toward you).
-under the hood, take out the pistons that secure the trim and Unscrew the two screws that secure the upper part.
-turn the wheels to the left or right, depending on which side we will disassemble first.
-in the wheel arches, Unscrew the screws that secure the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the bumper to the wings.
-turn the wheels to the left or right, depending on which side we will disassemble first.
-in the wheel arches, Unscrew the screws that secure the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the bumper to the wings.
-under the hood, Unscrew the four radiator grille screws (twisted from top to bottom).
-we unscrew the wheels to the left or right, depending on which side you will disassemble.
-Unscrew the screws in the wheel arches.
-Unscrew the three screws at the bottom of the bumper (twisted from bottom to top).
-with an assistant, pull the corners of the bumper to the sides and pull it forward from the guides.
-now you can disconnect the connectors from the fog lights (if any).
-we unscrew the wheels to the left or right, depending on which side you will disassemble.
-Unscrew the screws in the wheel arches.
-Unscrew the three screws at the bottom of the bumper (twisted from bottom to top).
-with an assistant, pull the corners of the bumper to the sides and pull it forward from the guides.
-now you can disconnect the connectors from the fog lights (if any).
Depending on the year of manufacture and body type, the attachment points differ slightly.
Front bumper
-open the hood.
-under the hood, unscrew the two screws, take out the five pistons, and remove the front bumper shield.
-unscrew eight screws along the perimeter of the lower part (twisted from bottom to top).
-depending on which side we will disassemble, turn the wheels out.
Front bumper
-open the hood.
-under the hood, unscrew the two screws, take out the five pistons, and remove the front bumper shield.
-unscrew eight screws along the perimeter of the lower part (twisted from bottom to top).
-depending on which side we will disassemble, turn the wheels out.
-open the hood.
-under the hood we take out the pins that secure the radiator grille and the upper part of the bumper.
-take out the pistons (inserted from bottom to top) that secure the lower part.
-turn the wheels depending on which side we will disassemble.
-under the hood we take out the pins that secure the radiator grille and the upper part of the bumper.
-take out the pistons (inserted from bottom to top) that secure the lower part.
-turn the wheels depending on which side we will disassemble.
-open the hood.
-under the hood we take out the pistons that secure the upper part.
-from the bottom, unscrew the screws that secure the fender liners and protection.
-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches, Unscrew the screws that secure the fender liners to the bumper.
-under the hood we take out the pistons that secure the upper part.
-from the bottom, unscrew the screws that secure the fender liners and protection.
-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches, Unscrew the screws that secure the fender liners to the bumper.
Below are the bumper mounting diagrams. The arrows indicate the locations of the screws, pins and latches.