-open the hood.
-under the hood we take out the pistons that secure the upper part.
-from the bottom, unscrew the screws that secure the fender liners and protection.
-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches, Unscrew the screws that secure the fender liners to the bumper.
-move the fender liners to the side and Unscrew one screw on each side that secures the corners of the bumper to the wings.
-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper forward (make sure not to break the wires).
- disconnect the connectors of the electrical equipment.
Rear bumper
-open the trunk lid.
-in the trunk opening we take out two (four) pistons.
-in the wheel arches, Unscrew the screws that secure the fender liners to the bumper.
-behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.
-from the bottom, unscrew the screws that secure the lower part.
-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper back (watch the wires).
- disconnect the connectors of the electrical equipment.
- 0
Tags: