How to remove the front and rear bumper of Renault Megane 4 (after 2015)

-open the hood.
-under the hood, unscrew the four screws, take out the two pistons, disconnect the air intake pipes and release the hood lock opening cable.
-from the bottom side, unscrew the three screws that secure the protection (twisted from bottom to top).
-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches we take out four pistons on each side and release the fender liners.

-move the fender liners to the side and Unscrew one screw on each side that secures the corners of the bumper to the wings.
-we release the latches in the wings (pull the corners towards you, if they don’t come out you need to pry them off with a flat screwdriver).
-with an assistant, pull the bumper forward (make sure not to break the wires).
- disconnect the connectors of the electrical equipment.

Rear bumper

-open the trunk lid.
-in the side trims of the trunk, open the hatches and unscrew the screws under them.
-pull out the rear lights.

-under the rear lights, Unscrew two screws on each side.
-in the trunk opening we take out the stops.
-from the bottom side, Unscrew the nine screws.

-in the wheel arches we bend the fender liners and unscrew one screw on each side that secures the corners of the bumper to the wings.
-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper back (watch the wires).
- disconnect the connectors of the electrical equipment.
Tags: