-open the hood.
-under the hood, Unscrew the four screws, take out two pistons, disconnect the air intake pipes and release the cable to open the hood lock.
-from the bottom, Unscrew the three screws that secure the protection (spun up).
-depending on which side we will disassemble, turn the wheels.
-wheel arches take out four pistons on each side and release the fender liner.
-move the fender liner to the side and Unscrew one screw on each side that attach the corners of the bumper to the wings.
-release the latches in the wings (pull the corners towards you, if you do not need to pry off with a flat screwdriver).
-with an assistant, pull the bumper forward (be careful not to break the wires).
-disconnect electrical connectors.
Rear bumper
-Open the trunk lid.
-in the side panels of the trunk, open the hatches and Unscrew the screws under them.
-take out the rear lights.
-under the rear lights, Unscrew two screws on each side.
-in the opening of the trunk take out the stops.
-from the bottom, Unscrew nine screws.
-in the wheel wells, bend the fender liner and Unscrew one screw on each side that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.

- 2
Tags: