Navigation

Top News

Statistics

Advertisement

СarSoftos.com » Page 285
How to remove the front and rear bumper of the BMW 5-series E60 (E61)


-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the screws that secure the fender liner to the bumper.
-under the hood, remove the seal, and Unscrew the bolts under it that secure the upper part of the bumper.
-remove the lower grille and fog lamp trim.
-under the gratings, Unscrew the four screws (spun up)
-(in some modifications) we move the edges of the fender liner to the side and unscrew two bolts on each side that attach the bumper to the wings (twisted from the bottom up).
  • LIKE
  • 3
How to remove front and rear bumper Peugeot Boxer (Citroën Jumper, Fiat Ducato) (1994-2006)


Depending on the year of manufacture, the attachment points differ slightly.
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws. Bumpers are removed very easily, and there is not much to describe here. It is more difficult to unscrew the screws than to find them.
  • LIKE
  • 3
Author: carsoftos777 | 29-01-2023, 23:10 | How To Remove Bumpers | Views: 716 | Comments: 0
How to remove the front and rear bumper AUDI A5


The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.
  • LIKE
  • 3
Author: carsoftos777 | 29-01-2023, 03:43 | Programs for cars and diagnostics | Views: 773 | Comments: 0
Carly OBD2 for BMW and Others 48.57 Full


Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
  • LIKE
  • 4
Author: carsoftos777 | 29-01-2023, 03:41 | How To Remove Bumpers | Views: 734 | Comments: 0
How to remove the front and rear bumper AUDI Q5


The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.
  • LIKE
  • 3
Author: carsoftos777 | 29-01-2023, 03:38 | How To Remove Bumpers | Views: 609 | Comments: 0
How to remove the front and rear bumper AUDI 80 B4


-in the center of the bumper at the very bottom, unscrew the bolt (under the curly screwdriver)
-along the edges of the front part of the bumper, remove the decorative grilles (if any) and unscrew the two bolts with a hex head (usually 6mm), they are twisted from the bottom up.
-pull off the edges of the bumper from the side locks (pull the edge of the bumper down and towards you)
- now you can disconnect the connectors from the fog lights and direction indicators (if any)
  • LIKE
  • 3


Description: The ETKA electronic catalog contains complete information about spare parts and accessories for VAG vehicles (VW, Seat, Skoda, AUDI), including minibuses.
  • LIKE
  • 7
Author: carsoftos777 | 29-01-2023, 00:58 | How To Remove Bumpers | Views: 671 | Comments: 0
How to remove front and rear bumper BMW X3 (E83)


-if there are headlight washers, take out the nozzles and remove the covers.
-open the hood.
- under the hood, unscrew the four screws (spun down) and remove the trim.
-under the trim, Unscrew the four screws (spun down) that secure the top.
-remove the decorative trims in the opening of the fog lights.
-Unscrew the screws behind the pads.
  • LIKE
  • 3
Author: carsoftos777 | 29-01-2023, 00:55 | Auto repair manual | Views: 1 556 | Comments: 0


Opening a car door without a key. Guide for all models. Sorted by car make/model. The manual is intended for service workshops, as well as emergency workers, in case of blocking the doors and the need to release victims of an accident.
  • LIKE
  • 3


Description: A program for viewing diagrams and the location of Airbag blocks.

  • LIKE
  • 5