Navigation

Top News

  • VAG DPF 4.44.15 Full
  • ETKA 8.1 (1639) 01.2026 + VIN database 2864000 pcs. Full
  • Dash-Tool V1.3 By Auto-Electronic
  • ETKA 8.2 (1636) 01.2026 + VIN database 2864000 pcs. Full
  • E OBD2 Facile 3.82.1145 Full
  • PET 2 Porsche 8.0 (851) 01.2026 + VIN database 21,692 pcs. Full
  • French firmware package for Renault, Peugeot, and Citroen with EDC15 and EDC16 ECUs
  • Kia and Hyundai turbodiesel firmware with EDC15 ECU
  • BMW (diesel) firmware with Bosch EDC16 and Bosch DDE4.0 ECUs
  • VAG MED9.x ECU firmware package

    • Statistics

    Advertisement

    СarSoftos.com » Page 276

    How to remove front and rear bumper Volvo S60, XC60, XC70 (after 2010)

    Author: carsoftos777 | 7-04-2023, 13:00 | How To Remove Bumpers | Views: 828 | Comments: 0
    How to remove front and rear bumper Volvo S60, XC60, XC70 (after 2010)


    -open the hood.
    -under the hood, remove the trim (if any).
    -take out nine caps (inserted from top to bottom) that secure the top.
    -turn the wheels to the side.
    -wheel arches take out five caps (maybe screws) on each side and one screw that attach the corners to the wings.
    -at the bottom, take out the three pistons (inserted from the bottom up).
    • LIKE
    • 4
    More details

    Carista 7.2 Pro Full

    Author: carsoftos777 | 31-03-2023, 16:37 | Programs for cars and diagnostics | Views: 2 202 | Comments: 0
    Carista 7.2 Pro Full


    Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
    The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
    • LIKE
    • 5
    More details

    How to remove front and rear bumper Peugeot 308

    Author: carsoftos777 | 31-03-2023, 16:26 | How To Remove Bumpers | Views: 2 120 | Comments: 0
    How to remove front and rear bumper Peugeot 308


    -open the hood.
    -under the hood, take out the caps and Unscrew the screws (inserted and screwed down) that secure the top.
    -we release the upper part from the latches (in the places indicated by the arrows you need to press with a flat screwdriver).
    -on the perimeter of the lower part, Unscrew the screws (spun up).
    -depending on which side we will disassemble, turn the wheels.
    -in the wheel arches release the fender liner.
    -for the fender liner, Unscrew one screw on each side (spun down) that attach the corners of the bumper to the wings.
    • LIKE
    • 4
    More details

    How to remove front and rear bumper Peugeot 5008

    Author: carsoftos777 | 31-03-2023, 16:22 | How To Remove Bumpers | Views: 969 | Comments: 0
    How to remove front and rear bumper Peugeot 5008


    -open the hood.
    -under the hood, Unscrew the two screws and take out the two pistons that secure the top.
    -around the perimeter of the lower part, Unscrew the eight screws that secure the lower part.
    • LIKE
    • 3
    More details

    John Deere Service Advisor 5.3.93 CF[08.2020] & AG [08.2020] + Setup [2020] Full

    Author: carsoftos777 | 31-03-2023, 15:41 | Programs for cars and diagnostics | Views: 7 898 | Comments: 0


    Description: John Deere Service Advisor Dealer Repair Manual, Maintenance, John Deere Wiring Diagrams.
    The dealer repair base contains detailed repair manuals, electrical and hydraulic diagrams, special operating instructions for all models of equipment, operation and maintenance manuals, technical characteristics and specifications, test results for all equipment, tightening torques, filling volumes, as well as a catalog of special John Deere tool.
    • LIKE
    • 5
    More details

    How to remove the front and rear bumper AUDI A3

    Author: carsoftos777 | 31-03-2023, 15:34 | How To Remove Bumpers | Views: 461 | Comments: 0
    How to remove the front and rear bumper AUDI A3


    The bumper is removed easily and the whole process does not take much time.
    -under the hood take out the caps that attach the bumper to the top frame.
    -along the entire length at the bottom of the bumper, Unscrew the screws securing the engine protection to the bumper.
    -Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
    -Unscrew three screws on each side (usually poses an asterisk) that attach the fender liner to the bumper.
    -pull off the edges of the bumper from the side rails.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper AUDI A6 C4

    Author: carsoftos777 | 31-03-2023, 15:29 | How To Remove Bumpers | Views: 543 | Comments: 0
    How to remove the front and rear bumper AUDI A6 C4


    In my opinion the most successful bumper mounting design. The bumper is removed in 5 minutes but at the same time it is very securely held on the car.
    • LIKE
    • 3
    More details

    John Deere/Hitachi Parts Advisor 06/2022 v1.18.12 [Multi] Full

    Author: carsoftos777 | 26-03-2023, 20:21 | Programs for cars and diagnostics | Views: 2 422 | Comments: 0


    Description: Catalog for the selection of John Deere and HITACHI spare parts.
    • LIKE
    • 3
    More details

    How to remove front and rear bumper Acura MDX (2001-2006)

    Author: carsoftos777 | 26-03-2023, 19:52 | How To Remove Bumpers | Views: 410 | Comments: 0


    Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, caps and latches.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper of the BMW 6-series E63 (E64)

    Author: carsoftos777 | 26-03-2023, 19:49 | How To Remove Bumpers | Views: 687 | Comments: 0
    How to remove the front and rear bumper of the BMW 6-series E63 (E64)


    -unscrew the wheels left or right, depending on which side you will unscrew first
    -in the wheel wells, you need to Unscrew the screws that secure the fender liner to the bumper.
    -under the hood, remove the seal (pull off towards the engine), and Unscrew the bolts under it that secure the upper part of the bumper.
    -remove the lower grille and fog lamp trims (attached with latches).
    -under the gratings, Unscrew the four screws (spun up)
    -pull off the corners from the side latches and pull the bumper towards you (in order not to scratch the paint on the wings, it is better to do it together).
    • LIKE
    • 3
    More details