Navigation

Top News

Statistics

Advertisement

Author: carsoftos777 | 10-05-2023, 23:03 | How To Remove Bumpers | Views: 452 | Comments: 0
How to remove the front and rear bumper Cadillac STS


Depending on the year of manufacture and body type, the attachment points differ.

-open the hood.
-under the hood take out the caps and Unscrew the screws that secure the top.
-turn the wheels to the side.
  • LIKE
  • 2
Author: carsoftos777 | 10-05-2023, 20:22 | How To Remove Bumpers | Views: 936 | Comments: 0
How to remove front and rear bumper VW Amarok


-open the hood.
-under the hood, Unscrew the four screws (spun down) that secure the top.
-at the bottom, Unscrew the screws (spun up).
-remove the license plate together with the frame and Unscrew the two screws under it.
-remove the decorative overlays of fog lamps (hold on latches).
-Unscrew the screws and remove the fog lights, Unscrew the screws behind them that secure the bumper.
-turn the wheels to the side.
  • LIKE
  • 2
How to remove front and rear bumper Opel ZAFIRA B (2005-2011)


-under the hood take out the caps that secure the grille (inserted from top to bottom).
-remove the grille from the lower latches upward.
-under the grille, Unscrew the screws.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
  • LIKE
  • 2
Author: carsoftos777 | 7-05-2023, 13:43 | How To Remove Bumpers | Views: 691 | Comments: 0
How to remove front and rear bumper Peugeot 307


-open the hood.
-under the hood take out the caps (inserted from top to bottom) that secure the top.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, take out the caps and release the fender liner (the fender liner can not be completely removed).
  • LIKE
  • 2
Author: carsoftos777 | 1-05-2023, 00:57 | How To Remove Bumpers | Views: 512 | Comments: 0
How to remove the front and rear bumper AUDI A8 D2


-Unscrew one screw at the bottom of the bumper along the edges and remove the decorative grilles.
-under the bars, Unscrew one bolt on each side (under the inner sprocket or hexagon), which are twisted from the bottom up and attach the aluminum bumper reinforcement to the body.
-Unscrew the wheels to the left or right side, depending on which side of the bumper will be unscrewed first.
-Unscrew the screws that secure the fender liner to the bumper.
-pulls the bumper over.
  • LIKE
  • 2
Author: carsoftos777 | 1-05-2023, 00:55 | How To Remove Bumpers | Views: 623 | Comments: 0
How to remove front and rear bumper BMW X5 E53


-the entire length of the lower part of the bumper, Unscrew the screws.
-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the bolts that secure the fender liner to the bumper.
-under the hood, along the edges of the radiator, Unscrew one screw on each side.
-(after 2003) we take out the decorative fog lamp grilles (attached with latches) and under them we unscrew one bolt on each side.
  • LIKE
  • 2
How to remove the front and rear bumper Chevrolet Malibu (after 2008)


Despite the external differences, the bumpers of both the 7th and 8th generation Chevrolet Malibu are mounted almost the same.
Depending on the year of manufacture, the attachment points differ slightly.
  • LIKE
  • 3
Author: carsoftos777 | 17-04-2023, 17:34 | How To Remove Bumpers | Views: 659 | Comments: 0
How to remove the front and rear bumper AUDI A8 D3


The bumper is removed together with the grille (beard).

-under the hood, Unscrew the upper bolts that secure the grille and the upper part of the bumper to the body.
-at the very bottom of the bumper along the entire length we take out the caps that secure the engine protection and fender liner.
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-in the wheel arches, Unscrew the screws and take out the caps that attach the fender liner to the bumper.
  • LIKE
  • 2
How to remove the front and rear bumper of a Chevrolet Tracker/Trax (after 2013)


Depending on the year of manufacture and model, the attachment points may differ.
The attachment points of the front and rear bumpers on the Chevrolet Trax are almost identical to the Buick Encore and Opel Mokka.
  • LIKE
  • 2


-open the hood.
-under the hood take out the six caps that secure the top.
-from the bottom, Unscrew the three screws that secure the protection.
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, Unscrew two screws on each side that attach the fender liner to the bumper.
  • LIKE
  • 2