Navigation

Top News

Statistics

Advertisement

Author: carsoftos777 | 27-09-2024, 01:32 | How To Remove Bumpers | Views: 178 | Comments: 0
How to remove front and rear bumper bumper Toyota Prius


-open the hood and remove the trim above the radiator (fastened with latches).
-under the trim, unscrew the screws and pull out the clips (screwed and inserted from top to bottom), which secure the upper part of the bumper.
-along the perimeter of the lower part, unscrew the screws and pull out the pins (screwed and inserted from bottom to top).
  • LIKE
  • 2
Author: carsoftos777 | 27-09-2024, 01:04 | How To Remove Bumpers | Views: 134 | Comments: 0
How to Remove Front and Rear Bumper Chevrolet Uplander


Below are the bumper mounting diagrams. The arrows indicate the locations of the screws, pins and nuts.
  • LIKE
  • 2


-open the hood.
-under the hood, take out the six screws that secure the upper part.
-disconnect the hood lock cable.
-from the bottom, unscrew the eight screws (screwed from the bottom up), which secure the engine protection.
-depending on which side we are disassembling, turn out the wheels.
  • LIKE
  • 2
Author: carsoftos777 | 25-09-2024, 03:22 | How To Remove Bumpers | Views: 99 | Comments: 0
How to remove the front and rear bumper Peugeot 106


Depending on the year of manufacture, the mounting locations may differ.
Below are the bumper mounting diagrams. The arrows indicate the screw locations.
  • LIKE
  • 2
Author: carsoftos777 | 25-09-2024, 03:04 | How To Remove Bumpers | Views: 105 | Comments: 0
How to remove front and rear bumper VW Touran (pre 2010)


Depending on the year of manufacture and model variant, the mounting locations differ.
Before 2006.
-Unscrew two screws under the hood, remove two clips near the lock and remove the radiator grille forward.
-Unscrew two screws under the grille (screwed from top to bottom).
-Unscrew the screws around the perimeter at the bottom of the bumper (screwed from bottom to top).
-Unscrew the wheels to the left or right, depending on which side you will disassemble.
-Unscrew the screws in the wheel arches that secure the fender liners to the bumper.
  • LIKE
  • 2


-open the hood.
-pull out six pins under the hood (turn the central part 90 degrees and pull it up).
-unscrew the three screws that secure the lower part of the bumper (screwed from the bottom up).
-depending on which side we are going to disassemble, turn out the wheels.
  • LIKE
  • 2


-open the hood and unscrew the screws and pull out the pins (inserted and screwed from top to bottom), remove the air intake.
-under the air intake, unscrew the screws and pull out the pins that secure the radiator grille.
-release the grille from the latches and remove.
-pull out the pin under the grille.
-unscrew the screws along the perimeter of the lower part (screwed from bottom to top).
  • LIKE
  • 3
How to remove the front and rear bumper of a Chevrolet HHR


-open the hood.
-unscrew four screws in the opening between the headlights.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
  • LIKE
  • 2
How to Remove Front and Rear Bumper Pontiac Vibe (2003-2008)


Front bumper
- open the hood.
- under the hood, pull out one (three) pistons and unscrew the two screws that secure the upper part of the bumper.
- (if any) pull out two pistons in the lower radiator grille (inserted from the bottom up).
- from the bottom side, unscrew the screws and pull out the pistons that secure the lower part.
- turn the wheels to the side.
  • LIKE
  • 3

Bumper mounting diagrams.

  • LIKE
  • 3