How to Remove Front and Rear Bumper Pontiac Sunfire

Front bumper
- open the hood.
- (depending on the year of manufacture, the places where the upper part is attached differ) under the hood, unscrew the screws and pull out the pins that secure the trim, radiator grille and upper part of the bumper.
- unscrew the screws and remove the headlights.
- through the headlight openings, unscrew two nuts on each side in the wings.

-from the bottom side, unscrew the screws and pull out the pins that secure the lower part.
-turn the wheels to the side.
-in the wheel arches, unscrew the screws and release the fender liners (front part).
-move the fender liners to the side and unscrew the screws that secure the bumper corners to the fenders.
-with an assistant, pull the bumper forward (watch the wires).
-disconnect the electrical equipment connectors (if any).

Rear bumper

-open the trunk lid.
-pull out the pins in the trunk opening (if any).
-remove the trunk trim.

-behind the trim, on the inside of the fenders, unscrew the screws.
-unscrew the screws and pull out the pins that secure the lower part.

-in the wheel arches, unscrew the screws that secure the fender liners and the sides of the bumper.
-with an assistant, carefully pull the bumper back from the guides (watch the wires).
-disconnect the electrical equipment connectors.
Tags: