-under the hood, Unscrew the three screws that secure the upper part (twisted from top to bottom).
-turn the wheels to the left or right, depending on which side we will disassemble first.
-in the wheel arches, unscrew the screws and plastic nuts that secure the fender liners.
-behind the wheel arch liners, Unscrew the nuts.
-we take out the pistons along the perimeter of the lower part and unscrew the screws.
-with an assistant, remove the bumper from the guides toward you.
-remove the connector from the fog lights (if equipped).
-if there are headlight washers, disconnect the hoses (to prevent the liquid from leaking onto the ground, you should prepare a special container).
Rear bumper
-open the trunk lid.
-in the trunk opening, Unscrew the four screws.
-unscrew the screws and pull out the pistons at the bottom (twisted from bottom to top).
-in the wheel arches, remove the fender liners and unscrew the plastic nuts.
-remove the bumper from the guides toward you.
-remove the connector from the license plate light.

- 1
Tags: