Navigation

Top News

Statistics

Advertisement

СarSoftos.com » Page 326
Author: carsoftos777 | 2-08-2023, 16:49 | Programs for cars and diagnostics | Views: 597 | Comments: 0
Carly OBD2 for BMW and Others 48.78 Full


Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
  • LIKE
  • 3
Author: carsoftos777 | 12-07-2023, 03:00 | Programs for cars and diagnostics | Views: 3 421 | Comments: 0


Description: a collection of programs for working with ManCats 2, Man Immo, Man Editor.
  • LIKE
  • 3
How to remove the front and rear bumper Cadillac CTS (2008-2014)


-open the hood.
-under the hood, take out the caps and remove the trim (if any).
-under the hood, Unscrew the two screws and take out the caps that secure the top.
-around the bottom of the take out the caps and Unscrew the screws that attach the bumper to the fender liner and protection.
-turn out the wheels (depending on which side we will disassemble).
-in the wheel wells take out the caps and release the fender liner.
-for the fender liner, Unscrew the screws that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
  • LIKE
  • 3
Author: carsoftos777 | 12-07-2023, 02:52 | How To Remove Bumpers | Views: 398 | Comments: 0


Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, caps and latches.
  • LIKE
  • 3
Author: carsoftos777 | 6-07-2023, 20:55 | Programs for cars and diagnostics | Views: 11 437 | Comments: 2


Description: Dealer software for PEUGEOT & CITROEN car diagnostics (Also Works with mitsubishi Lancer X ,ASX, XL).

  • LIKE
  • 11
How to remove the front and rear bumper Subaru B9 Tribeca (2005-2007)


-open the hood.
-under the hood take out the caps that secure the trim and the top, remove the trim.
-turn the wheels, depending on which side we will disassemble.
  • LIKE
  • 3
How to remove the front and rear bumper Cadillac CTS (2003-2007)


-open the hood.
-under the hood, remove the trim over the grille.
  • LIKE
  • 3


Description: — New versions of Porsche Piwis Tester (41.600 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
— Guided troubleshooting for 2021 (Online and Offline);
  • LIKE
  • 4
Author: carsoftos777 | 6-07-2023, 16:13 | How To Remove Bumpers | Views: 422 | Comments: 0


Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, caps and latches.
  • LIKE
  • 3
Author: carsoftos777 | 6-07-2023, 15:54 | How To Remove Bumpers | Views: 447 | Comments: 0
How to remove front and rear bumper BMW 7-series E38


-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the bolts (8mm) that attach the fender liner to the bumper.
-at the edges of the fog lights, closer to the center of the bumper, Unscrew one bolt (under the inner sprocket) on each side (spun up).
-in the lower part at the corners of the bumper, depress the latches and pull the bumper slightly forward.
  • LIKE
  • 3