Navigation

Top News

  • OBDeleven 0.104.0 Full
  • E OBD2 Facile 3.84.1158 Full
  • PsdZData 4.58.33 Full
  • Obd Mary 1.295 Full
  • Obd Mary 1.297 Full
  • Audi P119A Code — Fuel Pressure Sensor Implausible: Causes, Symptoms and Fix
  • Audi Code P310B — Full Diagnosis Guide for Low Pressure Fuel Regulation
  • Firmware for Audi
  • Firmware for Chery, Great Wall, Byd, and Brilliance Delphi MT-20U, MT-20U2, and MT-22U ECUs
  • Audi Code P2279 Explained — Why Unmetered Air Causes Rough Idle and Power Loss

    • Statistics

    Advertisement

    СarSoftos.com » Page 322

    How to remove front and rear bumper Peugeot 807 (Fiat Ulysse 2, Lancia Phedra, Citroën C8)

    Author: carsoftos777 | 20-02-2023, 03:51 | How To Remove Bumpers | Views: 598 | Comments: 0
    How to remove front and rear bumper Peugeot 807 (Fiat Ulysse 2, Lancia Phedra, Citroën C8)


    -open the hood.
    -under the hood take out the caps that secure the top.
    - around the perimeter of the lower part, unscrew the fasteners (you need to turn a quarter of a turn).
    -in the wheel arches, Unscrew the screws and take out the caps, release the fender liner.
    -for the fender liner, Unscrew the screws that attach the corners to the wings.
    • LIKE
    • 3
    More details

    How to remove front and rear bumper BMW 3-series E90

    Author: carsoftos777 | 20-02-2023, 03:49 | How To Remove Bumpers | Views: 494 | Comments: 0
    How to remove front and rear bumper BMW 3-series E90


    -along the entire length of the lower part of the bumper, Unscrew the seven screws (spun up).
    -Unscrew the wheels left or right, depending on which side you will unscrew first, and in the wheel arches, Unscrew the screws that attach the fender liner to the bumper.
    -move the edges of the fender liner to the side and Unscrew two bolts on each side that secure the bumper to the wings (spun up).
    -under the hood, Unscrew the four bolts that secure the upper part of the bumper.
    -pulls the bumper over.
    • LIKE
    • 3
    More details

    ECM Titanium 1.61 + WinOLS 4.51 (VMware) [2021]

    Author: carsoftos777 | 20-02-2023, 03:08 | Programs for cars and diagnostics | Views: 20 878 | Comments: 0


    Description: ECM Titanium is a program for interpreting and editing firmware files for engine control units. ECM Titanium allows you to work with firmware easily, conveniently, independently and with high reliability. By purchasing the original product, you will get all the widest possibilities and convenience when editing firmware for electronic control units from the industry leader. Regularly released updates and functionality expansion. This is the choice of professionals!
    • LIKE
    • 12
    More details

    How to remove the front and rear bumper AUDI A3 II

    Author: carsoftos777 | 20-02-2023, 03:02 | How To Remove Bumpers | Views: 453 | Comments: 0
    How to remove the front and rear bumper AUDI A3 II


    -under the hood, Unscrew the three bolts that secure the grille and bumper to the top bar (the bumper is removed with the bumper).
    -along the entire length at the bottom of the bumper, unscrew the screws securing the engine protection to the bumper (it is not necessary to remove the protection).
    -Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
    -Unscrew three screws on each side (usually poses an asterisk) that attach the fender liner to the bumper.
    • LIKE
    • 3
    More details

    How to remove front and rear bumper Renault Scenic 1 (1996-2003)

    Author: carsoftos777 | 20-02-2023, 02:57 | How To Remove Bumpers | Views: 720 | Comments: 0


    -open the hood.
    -remove the grille.
    -Unscrew one screw (spun down) between the headlights.
    -from the bottom, Unscrew the screws that secure the protection.
    -depending on which side we will disassemble, turn the wheels.
    -in the wheel wells, Unscrew the screws that secure the fender liner (front).
    • LIKE
    • 4
    More details

    EOBD Facile 3.49.0909 Full

    Author: carsoftos777 | 18-02-2023, 02:43 | Programs for cars and diagnostics | Views: 1 919 | Comments: 0
    EOBD Facile 3.49.0909 Full


    Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper AUDI A6 C7

    Author: carsoftos777 | 18-02-2023, 02:37 | How To Remove Bumpers | Views: 1 847 | Comments: 0
    How to remove the front and rear bumper AUDI A6 C7


    The bumper is removed along with the grille.
    Depending on the year of manufacture and type of model, the attachment points differ slightly.
    • LIKE
    • 3
    More details

    VAG ODIS-Service7.2.1+Engineering12.2+ settings (Acronis Legacy+UEFI) [2021] Full

    Author: carsoftos777 | 18-02-2023, 02:33 | Programs for cars and diagnostics | Views: 7 389 | Comments: 3


    Description: Acronis disk image with Windows 10 LTSC x64 RUSSIAN + ENGLISH (by default), contains both Legacy and UEFI bootloaders.
    • LIKE
    • 5
    More details

    How to remove the front and rear bumper of a Chevrolet Epica (after 2006)

    Author: carsoftos777 | 17-02-2023, 02:36 | How To Remove Bumpers | Views: 656 | Comments: 0
    How to remove the front and rear bumper of a Chevrolet Epica (after 2006)



    -open the hood.
    -under the hood take out the caps and remove the trim.
    -under the trim, Unscrew the two screws that secure the top.
    -Unscrew three screws on each side (spun down) and pull out the headlights.
    -in the openings of the headlights, Unscrew one screw and take out two caps on each side.
    • LIKE
    • 3
    More details

    How to remove front and rear bumper Peugeot Expert (Citroën Jumpy, Fiat Scudo) (1995-2006)

    Author: carsoftos777 | 17-02-2023, 02:31 | How To Remove Bumpers | Views: 1 300 | Comments: 0


    The bumper is removed along with the amplifier.
    -open the hood.
    -under the hood, Unscrew the screws, release the latches and remove the grille.
    • LIKE
    • 3
    More details