СarSoftos.com » Page 3

How to remove the front and rear bumper of Acura TL (Honda Inspire) (1998-2003)

Author: carsoftos777 | 6-11-2023, 02:10 | How To Remove Bumpers | Views: 70 | Comments: 0


-open the hood.
-under the hood we take out ten pistons (inserted from top to bottom) that secure the trim above the radiator grille.
-take out the two pistons that secure the upper part.
-unscrew the two screws and take out the six pistons (twisted and inserted from the bottom up), which secure the lower part to the fender liners and protection.
-turn the wheels to the side.
-in the wheel arches we release the fender liners.
  • LIKE
  • 0
More details

How to remove the front and rear bumper of Renault Espace 4 (2002-2014)

Author: carsoftos777 | 6-11-2023, 02:00 | How To Remove Bumpers | Views: 64 | Comments: 0


Depending on the year of manufacture, the mounting locations differ.
Front bumper
-open the hood.
-under the hood we take out the four pistons.
-from the bottom side, unscrew the screws (twisted from bottom to top) that secure the bottom of the bumper.
-depending on which side we will disassemble, turn the wheels out.
  • LIKE
  • 0
More details

Suzuki SDS 38.0.0.2

Author: carsoftos777 | 6-11-2023, 01:55 | Programs for cars and diagnostics | Views: 161 | Comments: 0


Description: Program for diagnosing Suzuki motorcycles 1999-2015.
Works with motorcycles via Suziki diagnosis interface box
09904-41010-00
09904-41011-00
09904-41012-00
  • LIKE
  • 0
More details

Renault Can Clip 231 [2023]

Author: carsoftos777 | 6-11-2023, 00:13 | Programs for cars and diagnostics | Views: 798 | Comments: 0


Description: Renault Can Clip software, which is a service software that performs maintenance and diagnostics of Renault and Dacia cars. Using the software, it is possible to carry out a complete diagnosis of the ECU of cars (automatic transmission, engine injection, standard xenon, ABS + ESP, climate control, airbags, dashboard, central control system).
  • LIKE
  • 0
More details

How to remove the front and rear bumper of Renault Espace 4 (2002-2014)

Author: carsoftos777 | 5-11-2023, 23:35 | How To Remove Bumpers | Views: 48 | Comments: 0


Depending on the year of manufacture, the mounting locations differ.
Front bumper
-open the hood.
-under the hood we take out the four pistons.
-from the bottom side, unscrew the screws (twisted from bottom to top) that secure the bottom of the bumper.
-depending on which side we will disassemble, turn the wheels out.
  • LIKE
  • 0
More details

How to remove the front and rear bumper of Renault Trafic 2 (2001-2014)

Author: carsoftos777 | 5-11-2023, 23:22 | How To Remove Bumpers | Views: 45 | Comments: 0


Front bumper
Before restyling
Depending on the year of manufacture, the mounting locations differ.
  • LIKE
  • 0
More details

Hino DX3 v1.23.3 [2023] Full

Author: carsoftos777 | 5-11-2023, 22:34 | Programs for cars and diagnostics | Views: 412 | Comments: 0


The HINO Diagnostic eXplorer DX3 is a tool equipped with all the functions needed to diagnose trouble, check functions, and configure the settings of the electronic systems built into HINO engines.
  • LIKE
  • 1
More details

OBDeleven 0.72.0 Full

Author: carsoftos777 | 5-11-2023, 22:16 | Programs for cars and diagnostics | Views: 627 | Comments: 0


Description: Diagnosis, reading, clearing and exchanging fault codes, programming and monitoring the vehicle, setting and activating vehicle functions, etc.
  • LIKE
  • 0
More details

AlfaOBD 2.3.3.0 Full

Author: carsoftos777 | 22-10-2023, 16:38 | Programs for cars and diagnostics | Views: 904 | Comments: 0


The program works via OBDKey, KLLine or ELM327 adapters. To communicate with some blocks, you need to modify the adapter or use an adapter.
Data exchange with electronic units of cars manufactured by Fiat Group. Determining and erasing errors in electronic components, monitoring parameters.
  • LIKE
  • 1
More details

How to remove the front and rear bumper of Alfa Romeo MiTo

Author: carsoftos777 | 22-10-2023, 16:29 | How To Remove Bumpers | Views: 78 | Comments: 0
How to remove the front and rear bumper of Alfa Romeo MiTo


-open the hood.
-under the hood, Unscrew the four screws (twisted from top to bottom) that secure the upper part.
-Unscrew the four screws (twisted from bottom to top) that secure the lower part of the bumper.
-turn the wheels to the side.
-in the wheel arches we unscrew three screws and one on the bottom side that secure the fender liners (no need to remove).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the wings.
  • LIKE
  • 0
More details
← 1 2 3 4 5 6 7 8 9 10 ... 284 →