Bumper mounting diagrams. The arrows indicate screws, rivets and latches.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 20-10-2023, 02:27 | Programs for cars and diagnostics | Views: 822 | Comments: 0
Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
-open the hood.
-under the hood, take out the pistons and Unscrew the screws that secure the upper part.
-around the perimeter of the lower part, unscrew two screws and take out seven pistons (twisted and inserted from bottom to top).
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel arches, unscrew two screws on each side and release the fender liners.
-release the latches in the wings (pull the corners toward you).
-under the hood, take out the pistons and Unscrew the screws that secure the upper part.
-around the perimeter of the lower part, unscrew two screws and take out seven pistons (twisted and inserted from bottom to top).
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel arches, unscrew two screws on each side and release the fender liners.
-release the latches in the wings (pull the corners toward you).
Author: carsoftos777 | 20-10-2023, 02:18 | Programs for cars and diagnostics | Views: 578 | Comments: 0
Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.
-under the hood, take out the pistons that secure the trim and Unscrew the two screws that secure the upper part.
-turn the wheels to the left or right, depending on which side we will disassemble first.
-in the wheel arches, Unscrew the screws that secure the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the bumper to the wings.
-turn the wheels to the left or right, depending on which side we will disassemble first.
-in the wheel arches, Unscrew the screws that secure the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the bumper to the wings.
Author: carsoftos777 | 20-10-2023, 02:11 | Programs for cars and diagnostics | Views: 571 | Comments: 0
Description: Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines.
-under the hood, Unscrew the four radiator grille screws (twisted from top to bottom).
-we unscrew the wheels to the left or right, depending on which side you will disassemble.
-Unscrew the screws in the wheel arches.
-Unscrew the three screws at the bottom of the bumper (twisted from bottom to top).
-with an assistant, pull the corners of the bumper to the sides and pull it forward from the guides.
-now you can disconnect the connectors from the fog lights (if any).
-we unscrew the wheels to the left or right, depending on which side you will disassemble.
-Unscrew the screws in the wheel arches.
-Unscrew the three screws at the bottom of the bumper (twisted from bottom to top).
-with an assistant, pull the corners of the bumper to the sides and pull it forward from the guides.
-now you can disconnect the connectors from the fog lights (if any).
Author: carsoftos777 | 9-10-2023, 01:57 | Programs for cars and diagnostics | Views: 728 | Comments: 0
BimmerLink for Android is the direct link to your BMW or Mini. Using an OBD adapter you can read trouble codes or display sensor values in realtime, check the current state of the DPF in your car or register a new battery after replacement. BimmerLink even allows you to remotely control the exhaust flap or mute the Active Sound Design in your car.
Author: carsoftos777 | 9-10-2023, 01:53 | Programs for cars and diagnostics | Views: 599 | Comments: 1
BimmerCode 4.19.0-11402 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
Depending on the year of manufacture and body type, the attachment points differ slightly.
Front bumper
-open the hood.
-under the hood, unscrew the two screws, take out the five pistons, and remove the front bumper shield.
-unscrew eight screws along the perimeter of the lower part (twisted from bottom to top).
-depending on which side we will disassemble, turn the wheels out.
Front bumper
-open the hood.
-under the hood, unscrew the two screws, take out the five pistons, and remove the front bumper shield.
-unscrew eight screws along the perimeter of the lower part (twisted from bottom to top).
-depending on which side we will disassemble, turn the wheels out.