СarSoftos.com » Page 10
Author: carsoftos777 | 6-07-2023, 15:54 | How To Remove Bumpers | Views: 196 | Comments: 0
How to remove front and rear bumper BMW 7-series E38


-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the bolts (8mm) that attach the fender liner to the bumper.
-at the edges of the fog lights, closer to the center of the bumper, Unscrew one bolt (under the inner sprocket) on each side (spun up).
-in the lower part at the corners of the bumper, depress the latches and pull the bumper slightly forward.
  • LIKE
  • 1
Author: carsoftos777 | 4-07-2023, 00:03 | Programs for cars and diagnostics | Views: 1 401 | Comments: 0
Carista 8.0 Pro Full


Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
  • LIKE
  • 3
How to remove front and rear bumper Volvo S60 V70 XC70 (2000-2009)


-Unscrew the nuts and remove the headlight wipers (if any).
-open the hood.
-under the hood take out the six caps that secure the top.
-with a flat screwdriver, pry off the lining (you can not completely remove the lining, you need to get access to the bolts).
  • LIKE
  • 1
How to remove the front and rear bumper Subaru Legacy BL, BP (Outback) (2003-2009)


-open the hood.
-under the hood, Unscrew the screws and take out the caps that secure the grille and the upper part of the bumper.
-release from the latches and pull out the front grille.
-turn the wheels, depending on which side we will disassemble.
-in the wheel arches release the fender liner.
  • LIKE
  • 1
Author: carsoftos777 | 3-07-2023, 12:12 | Programs for cars and diagnostics | Views: 581 | Comments: 0
Carly OBD2 for BMW and Others 48.76 Full


Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
  • LIKE
  • 1
Author: carsoftos777 | 29-06-2023, 22:13 | How To Remove Bumpers | Views: 267 | Comments: 0


Bumper mounts.

  • LIKE
  • 1
Author: carsoftos777 | 29-06-2023, 22:11 | Programs for cars and diagnostics | Views: 1 230 | Comments: 0
EOBD Facile 3.51.0939 Full


Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.
  • LIKE
  • 5
Author: carsoftos777 | 29-06-2023, 22:07 | How To Remove Bumpers | Views: 149 | Comments: 0
How to remove front and rear bumper Skoda Superb 2 (B6)


Depending on the year of manufacture and model variant, the attachment points may differ slightly.

-under the hood, above the grille, take out the caps and remove the covers.
-near the headlights, Unscrew one screw on each side (spun down) that secure the grille.
-take out the caps around the perimeter at the bottom (inserted from the bottom up).
-Unscrew the wheels to the left or right side, depending on which side you will disassemble first.
  • LIKE
  • 1
How to remove front and rear bumper Opel Astra F (1992-1998)


-remove the grille (holds on latches).
-Unscrew the screws that secure the brackets.
-Unscrew the nuts that are attached to the front panel.
-in the wheel wells, Unscrew the screws that attach the bumper to the wings.
  • LIKE
  • 1


Description:
– New versions of Porsche Piwis Tester (41.500 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
  • LIKE
  • 2