Description: ISTA+ is a dealer program designed for diagnostics and maintenance of BMW vehicles.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 5-06-2023, 02:43 | Programs for cars and diagnostics | Views: 6 804 | Comments: 0
Depending on the year of manufacture, the attachment points may differ.
-open the hood.
-under the hood take out the caps and remove the trim.
-under the trim, Unscrew the six screws and take out the two pistons that secure the grille and the top.
-open the hood.
-under the hood take out the caps and remove the trim.
-under the trim, Unscrew the six screws and take out the two pistons that secure the grille and the top.
Bumper mounts. The arrows indicate the screws, caps and latches.
Depending on the year of manufacture, the attachment points differ slightly.
Depending on the year of manufacture, the attachment points differ slightly.
Description: Spare parts and operator's manuals for current and discontinued models of ISEKI tractors.
Author: carsoftos777 | 1-06-2023, 21:32 | Programs for cars and diagnostics | Views: 4 208 | Comments: 0
open the hood.
-under the hood take out nine caps and remove the trim over the grille.
-under the trim, Unscrew the two screws and take out the two pistons.
-on the perimeter of the lower part, Unscrew the two screws and take out nine caps (twisted and inserted from the bottom up).
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel wells, Unscrew the screws and release the fender liner.
-under the hood take out nine caps and remove the trim over the grille.
-under the trim, Unscrew the two screws and take out the two pistons.
-on the perimeter of the lower part, Unscrew the two screws and take out nine caps (twisted and inserted from the bottom up).
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel wells, Unscrew the screws and release the fender liner.
-open the hood.
-under the hood take out the four pistons and remove the grille up.
-take out the caps under the grille that secure the top.
-on the perimeter of the lower part, Unscrew the screws and release the clamps.
-depending on which side we will disassemble turn the wheels.
-under the hood take out the four pistons and remove the grille up.
-take out the caps under the grille that secure the top.
-on the perimeter of the lower part, Unscrew the screws and release the clamps.
-depending on which side we will disassemble turn the wheels.
Author: carsoftos777 | 28-05-2023, 03:37 | Programs for cars and diagnostics | Views: 1 851 | Comments: 0
Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
Depending on the year of manufacture and body type, the attachment points differ slightly.
Front bumper
-open the hood.
-under the hood take out four pistons (inserted from top to bottom).
-(before restyling) pull up the grille.
Front bumper
-open the hood.
-under the hood take out four pistons (inserted from top to bottom).
-(before restyling) pull up the grille.
-open the hood.
-under the hood, Unscrew the four screws and remove the grille (the bottom is held on by latches, you need to pull it towards you).
-from the bottom, Unscrew the seven screws (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner (front), release the fender liner from the bumper.
-under the hood, Unscrew the four screws and remove the grille (the bottom is held on by latches, you need to pull it towards you).
-from the bottom, Unscrew the seven screws (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner (front), release the fender liner from the bumper.