Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.
-open the hood. -under the hood, take out two pistons and Unscrew the two screws that secure the upper part. - unscrew the screws (twisted from bottom to top) that secure the lower part. -depending on which side we will disassemble, turn the wheels out. -in the wheel arches we take out the pistons and release the fender liners (no need to remove).
-Unscrew the screws along the perimeter of the lower part. -depending on which side we will disassemble, turn the wheels out. -in the wheel arches we release the fender liners (you don’t have to remove them completely). -behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.
Description: An image of Windows XP using VMWare Workstation in vmdk format based on an assembly with programs: - Delphi 2017.1 Cars (Activated for serial number 100251) - Delphi 2017.1 Trucks (Activated on serial number 100251) - Wurth WOW! 4.15.3 - Wurth WOW! 5.00.8
Description: Diagnosis, reading, clearing and exchanging fault codes, programming and monitoring the vehicle, setting and activating vehicle functions, etc.
-open the hood and unscrew the three screws (twisted from top to bottom) that secure the upper part of the bumper. -at the very bottom, unscrew the six screws (twisted from bottom to top). -turn the wheels to the left or right, depending on which side we will disassemble first.