How to remove the front and rear bumper of a Toyota Carina E

-open the hood and unscrew the screws (twisted from top to bottom), remove the radiator grille.
-Unscrew the screws and pull out the piston under the radiator grille.
-remove the direction indicators.
-under the direction indicators, Unscrew one screw on each side.
-unscrew the screws along the perimeter of the lower part (twisted from bottom to top).
-turn the wheels to the left or right, depending on which side we will disassemble first.
-in the wheel arches we take out the caps that secure the fender liners.

-move the fender liners to the side and Unscrew one screw on each side that secures the corners to the wings.
-with an assistant, remove the bumper from the guides toward you.
-remove the connector from the fog lights (if equipped).

Rear bumper

Depending on the year of manufacture and model type, the mounting locations may differ.
-open the trunk lid and Unscrew the five screws (screwed from top to bottom).
-in the wheel arches we take out the caps that secure the fender liners.
-move the fender liners to the side and Unscrew one screw on each side that secures the corners to the wings.

-unscrew the screws along the perimeter at the bottom (twisted from bottom to top).
-with an assistant, release the bumper from the latches in the wings and pull it off the guides towards you.
Tags: