Navigation

Top News

  • Pre-installed ODIS Service 25.0.3 and ODIS Engineering 19 [2025] Full
  • JLR SDD 168 + Files Offline [06.2025] Full
  • OBDeleven 0.101.0 Full
  • FSC Tools 2.18 Full
  • PyClip 3 android15_v0.02.24 (1023224) mod Renault Car Diagnostics
  • AlfaOBD 2.4.4.0 Full
  • Obd Mary 1.281 Full
  • ADACT firmware for gasoline BMWs equipped with Siemens and Bosch ECUs.
  • E OBD2 Facile 3.80.1127 Full
  • VW Golf 4 2.3 ME7.1 Engine Firmware Tuning 0261202278 1037363156

    • Statistics

    Advertisement

    СarSoftos.com » Page 231

    Renault Can Clip 222 [2022] Full

    Author: carsoftos777 | 27-02-2023, 02:09 | Programs for cars and diagnostics | Views: 5 173 | Comments: 1


    Description: Renault Can Clip software, which is a service software that performs maintenance and diagnostics of Renault and Dacia cars. Using the software, it is possible to carry out a complete diagnosis of the ECU of machines (automatic transmission, engine-injector, standard xenon, ABS + ESP, climate control, airbags, dashboard, TsKBES).
    • LIKE
    • 4
    More details

    How to remove front and rear bumper Peugeot 508

    Author: carsoftos777 | 26-02-2023, 03:37 | How To Remove Bumpers | Views: 1 614 | Comments: 0
    How to remove front and rear bumper Peugeot 508


    -open the hood.
    -under the hood, Unscrew the screws and take out the caps that secure the trim.
    -Unscrew the screws that secure the top.
    -around the perimeter of the lower part, Unscrew the screws that secure the lower part.
    -depending on which side we will disassemble, turn the wheels.
    -in the wheel arches, Unscrew the screws and release the fender liner (completely can not be removed).
    • LIKE
    • 3
    More details

    How to remove front and rear bumper Alfa Romeo 147

    Author: carsoftos777 | 26-02-2023, 03:35 | How To Remove Bumpers | Views: 626 | Comments: 0


    -open the hood.
    -under the hood, Unscrew the four screws (spun down) that secure the top.
    -Unscrew the screws around the perimeter of the bottom.
    • LIKE
    • 2
    More details

    Carly OBD2 for BMW and Others 48.61 Full

    Author: carsoftos777 | 26-02-2023, 02:23 | Programs for cars and diagnostics | Views: 1 277 | Comments: 1
    Carly OBD2 for BMW and Others 48.61 Full


    Description: A program for testing the computer of BMW cars.
    Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
    • LIKE
    • 2
    More details

    How to remove the front and rear bumper Cadillac Escalade GMT900 (2007-2013)

    Author: carsoftos777 | 22-02-2023, 03:28 | How To Remove Bumpers | Views: 2 276 | Comments: 0
    How to remove the front and rear bumper Cadillac Escalade GMT900 (2007-2013)


    Depending on the body type, the attachment points may differ.
    Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws and caps.
    • LIKE
    • 2
    More details

    How to remove the front and rear bumper AUDI 80 B3

    Author: carsoftos777 | 22-02-2023, 03:23 | How To Remove Bumpers | Views: 506 | Comments: 0


    - remove the grille
    - unscrew the self-tapping screw under the grate
    -along the edges of the front part of the bumper, remove the decorative grilles (if any) and Unscrew the two hex bolts, they are twisted from the bottom up.
    -pull off the edges of the bumper from the side locks (pull the edge of the bumper down and towards you).
    • LIKE
    • 2
    More details

    BMW ISTA 4.39.20 [12.2022] Full

    Author: carsoftos777 | 21-02-2023, 22:17 | Programs for cars and diagnostics | Views: 19 408 | Comments: 0


    Description: ISTA+ is a dealer program designed for diagnostics and maintenance of BMW vehicles.
    • LIKE
    • 12
    More details

    How to remove front and rear bumper Peugeot 807 (Fiat Ulysse 2, Lancia Phedra, Citroën C8)

    Author: carsoftos777 | 20-02-2023, 03:51 | How To Remove Bumpers | Views: 595 | Comments: 0
    How to remove front and rear bumper Peugeot 807 (Fiat Ulysse 2, Lancia Phedra, Citroën C8)


    -open the hood.
    -under the hood take out the caps that secure the top.
    - around the perimeter of the lower part, unscrew the fasteners (you need to turn a quarter of a turn).
    -in the wheel arches, Unscrew the screws and take out the caps, release the fender liner.
    -for the fender liner, Unscrew the screws that attach the corners to the wings.
    • LIKE
    • 2
    More details

    How to remove front and rear bumper BMW 3-series E90

    Author: carsoftos777 | 20-02-2023, 03:49 | How To Remove Bumpers | Views: 485 | Comments: 0
    How to remove front and rear bumper BMW 3-series E90


    -along the entire length of the lower part of the bumper, Unscrew the seven screws (spun up).
    -Unscrew the wheels left or right, depending on which side you will unscrew first, and in the wheel arches, Unscrew the screws that attach the fender liner to the bumper.
    -move the edges of the fender liner to the side and Unscrew two bolts on each side that secure the bumper to the wings (spun up).
    -under the hood, Unscrew the four bolts that secure the upper part of the bumper.
    -pulls the bumper over.
    • LIKE
    • 2
    More details

    ECM Titanium 1.61 + WinOLS 4.51 (VMware) [2021]

    Author: carsoftos777 | 20-02-2023, 03:08 | Programs for cars and diagnostics | Views: 19 850 | Comments: 0


    Description: ECM Titanium is a program for interpreting and editing firmware files for engine control units. ECM Titanium allows you to work with firmware easily, conveniently, independently and with high reliability. By purchasing the original product, you will get all the widest possibilities and convenience when editing firmware for electronic control units from the industry leader. Regularly released updates and functionality expansion. This is the choice of professionals!
    • LIKE
    • 10
    More details