Navigation

Top News

  • Pre-installed ODIS Service 25.0.3 and ODIS Engineering 19 [2025] Full
  • JLR SDD 168 + Files Offline [06.2025] Full
  • OBDeleven 0.101.0 Full
  • FSC Tools 2.18 Full
  • PyClip 3 android15_v0.02.24 (1023224) mod Renault Car Diagnostics
  • AlfaOBD 2.4.4.0 Full
  • Obd Mary 1.281 Full
  • ADACT firmware for gasoline BMWs equipped with Siemens and Bosch ECUs.
  • E OBD2 Facile 3.80.1127 Full
  • VW Golf 4 2.3 ME7.1 Engine Firmware Tuning 0261202278 1037363156

    • Statistics

    Advertisement

    СarSoftos.com » Page 228

    How to remove the front and rear bumper AUDI A3

    Author: carsoftos777 | 31-03-2023, 15:34 | How To Remove Bumpers | Views: 456 | Comments: 0
    How to remove the front and rear bumper AUDI A3


    The bumper is removed easily and the whole process does not take much time.
    -under the hood take out the caps that attach the bumper to the top frame.
    -along the entire length at the bottom of the bumper, Unscrew the screws securing the engine protection to the bumper.
    -Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
    -Unscrew three screws on each side (usually poses an asterisk) that attach the fender liner to the bumper.
    -pull off the edges of the bumper from the side rails.
    • LIKE
    • 2
    More details

    How to remove the front and rear bumper AUDI A6 C4

    Author: carsoftos777 | 31-03-2023, 15:29 | How To Remove Bumpers | Views: 540 | Comments: 0
    How to remove the front and rear bumper AUDI A6 C4


    In my opinion the most successful bumper mounting design. The bumper is removed in 5 minutes but at the same time it is very securely held on the car.
    • LIKE
    • 2
    More details

    John Deere/Hitachi Parts Advisor 06/2022 v1.18.12 [Multi] Full

    Author: carsoftos777 | 26-03-2023, 20:21 | Programs for cars and diagnostics | Views: 2 398 | Comments: 0


    Description: Catalog for the selection of John Deere and HITACHI spare parts.
    • LIKE
    • 2
    More details

    How to remove front and rear bumper Acura MDX (2001-2006)

    Author: carsoftos777 | 26-03-2023, 19:52 | How To Remove Bumpers | Views: 408 | Comments: 0


    Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, caps and latches.
    • LIKE
    • 2
    More details

    How to remove the front and rear bumper of the BMW 6-series E63 (E64)

    Author: carsoftos777 | 26-03-2023, 19:49 | How To Remove Bumpers | Views: 680 | Comments: 0
    How to remove the front and rear bumper of the BMW 6-series E63 (E64)


    -unscrew the wheels left or right, depending on which side you will unscrew first
    -in the wheel wells, you need to Unscrew the screws that secure the fender liner to the bumper.
    -under the hood, remove the seal (pull off towards the engine), and Unscrew the bolts under it that secure the upper part of the bumper.
    -remove the lower grille and fog lamp trims (attached with latches).
    -under the gratings, Unscrew the four screws (spun up)
    -pull off the corners from the side latches and pull the bumper towards you (in order not to scratch the paint on the wings, it is better to do it together).
    • LIKE
    • 2
    More details

    VAG dataflash [23.03] Full

    Author: carsoftos777 | 26-03-2023, 16:28 | Programs for cars and diagnostics | Views: 5 862 | Comments: 0


    Description: The database includes firmware files for VAG: Audi, Volkswagen, Skoda, SEAT, Bentley, Lamborghini, MAN for software: ODIS and VCP (Vag Can Pro).
    • LIKE
    • 4
    More details

    How to remove the front and rear bumper of a Chevrolet Corvette (2004-2012)

    Author: carsoftos777 | 26-03-2023, 16:20 | How To Remove Bumpers | Views: 342 | Comments: 0
    How to remove the front and rear bumper of a Chevrolet Corvette (2004-2012)


    Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws and nuts.
    • LIKE
    • 2
    More details

    How to remove the front and rear bumper AUDI A4 B6

    Author: carsoftos777 | 26-03-2023, 16:12 | How To Remove Bumpers | Views: 449 | Comments: 0
    How to remove the front and rear bumper AUDI A4 B6


    The bumper is not as difficult to remove as it might seem at first glance.
    -at the edges at the bottom of the bumper, remove the decorative grilles, for this you need to press the latches with a flat screwdriver.
    -under the gratings, Unscrew the two bolts for the internal hexagon (there are under the asterisk), which are twisted from the bottom up and secure the bumper amplifier to the body (the location of the bolts is indicated by arrows).
    -Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
    -Unscrew the screws that secure the fender liner to the bumper.
    • LIKE
    • 2
    More details

    HTTWIN for Windows x64 bit (NTVDMX64) 1.4 [ENG] Full

    Author: carsoftos777 | 26-03-2023, 15:39 | Programs for cars and diagnostics | Views: 2 210 | Comments: 0


    Description: As you know, running HTTwin on a 64-bit system is very difficult. HTTWin is the very first diagnostic for Mercedes and all old cars are diagnosed only with it.
    Today, a way to install and run the HTTWin program on a 64-bit system using NTVDMX64 is already available.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper AUDI A7

    Author: carsoftos777 | 26-03-2023, 04:37 | How To Remove Bumpers | Views: 973 | Comments: 0
    How to remove the front and rear bumper AUDI A7


    The bumper is removed along with the grille.

    -under the hood take out the caps and remove the trim over the grille.
    -Unscrew the screws under the trim (spun down).
    -Unscrew the screws around the perimeter at the bottom (spun up).
    -turn the wheels to the left or right side, depending on which side we will disassemble first.
    -in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner.
    • LIKE
    • 2
    More details