Description: Service documentation for the repair of the engine, chassis, transmission of the car Ford Fiesta MK5 (2002-2008). Electrical diagrams are presented in a separate file.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 7-05-2023, 15:13 | Programs for cars and diagnostics | Views: 1 221 | Comments: 0
BimmerCode 4.13.2-11165 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
Author: carsoftos777 | 7-05-2023, 14:18 | Programs for cars and diagnostics | Views: 3 977 | Comments: 0
Description: Until recently, the BMW Inpa/Ediabas engineering complex was used by the personnel of all divisions and branches of the BMW concern for the development, debugging and testing of electronic control units for all cars produced by the concern. In addition to engineering functions, the complex also has comprehensive diagnostic capabilities. Due to its original purpose, the scanner provides access to any car ECU. Functions for reading real-time parameters and testing actuators allow you to check the correct operation of any control, be it a button or a potentiometer. If desired, you can monitor the position of each air damper of the climate control unit or adjust the volume of the radio using a personal computer connected via the diagnostic connector.
-open the hood.
-under the hood take out the caps (inserted from top to bottom) that secure the top.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, take out the caps and release the fender liner (the fender liner can not be completely removed).
-under the hood take out the caps (inserted from top to bottom) that secure the top.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, take out the caps and release the fender liner (the fender liner can not be completely removed).
Author: carsoftos777 | 1-05-2023, 01:03 | Programs for cars and diagnostics | Views: 16 841 | Comments: 0
Author: carsoftos777 | 1-05-2023, 01:00 | Programs for cars and diagnostics | Views: 936 | Comments: 0
Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
-Unscrew one screw at the bottom of the bumper along the edges and remove the decorative grilles.
-under the bars, Unscrew one bolt on each side (under the inner sprocket or hexagon), which are twisted from the bottom up and attach the aluminum bumper reinforcement to the body.
-Unscrew the wheels to the left or right side, depending on which side of the bumper will be unscrewed first.
-Unscrew the screws that secure the fender liner to the bumper.
-pulls the bumper over.
-under the bars, Unscrew one bolt on each side (under the inner sprocket or hexagon), which are twisted from the bottom up and attach the aluminum bumper reinforcement to the body.
-Unscrew the wheels to the left or right side, depending on which side of the bumper will be unscrewed first.
-Unscrew the screws that secure the fender liner to the bumper.
-pulls the bumper over.
-the entire length of the lower part of the bumper, Unscrew the screws.
-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the bolts that secure the fender liner to the bumper.
-under the hood, along the edges of the radiator, Unscrew one screw on each side.
-(after 2003) we take out the decorative fog lamp grilles (attached with latches) and under them we unscrew one bolt on each side.
-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the bolts that secure the fender liner to the bumper.
-under the hood, along the edges of the radiator, Unscrew one screw on each side.
-(after 2003) we take out the decorative fog lamp grilles (attached with latches) and under them we unscrew one bolt on each side.
Author: carsoftos777 | 17-04-2023, 17:40 | Programs for cars and diagnostics | Views: 1 128 | Comments: 0
Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Despite the external differences, the bumpers of both the 7th and 8th generation Chevrolet Malibu are mounted almost the same.
Depending on the year of manufacture, the attachment points differ slightly.
Depending on the year of manufacture, the attachment points differ slightly.