Navigation

Top News

Statistics

Advertisement

How to Remove the Front and Rear Bumper of a Chevrolet Equinox (after 2010)


-open the hood.
-under the hood take out the caps and lift up the lining over the headlights.
-Unscrew the four screws that secure the top.
  • LIKE
  • 2
How to remove the front and rear bumper Cadillac CTS (2008-2014)


-open the hood.
-under the hood, take out the caps and remove the trim (if any).
-under the hood, Unscrew the two screws and take out the caps that secure the top.
-around the bottom of the take out the caps and Unscrew the screws that attach the bumper to the fender liner and protection.
-turn out the wheels (depending on which side we will disassemble).
-in the wheel wells take out the caps and release the fender liner.
-for the fender liner, Unscrew the screws that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
  • LIKE
  • 2
Author: carsoftos777 | 12-07-2023, 02:52 | How To Remove Bumpers | Views: 393 | Comments: 0


Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, caps and latches.
  • LIKE
  • 2
How to remove the front and rear bumper Subaru B9 Tribeca (2005-2007)


-open the hood.
-under the hood take out the caps that secure the trim and the top, remove the trim.
-turn the wheels, depending on which side we will disassemble.
  • LIKE
  • 2
How to remove the front and rear bumper Cadillac CTS (2003-2007)


-open the hood.
-under the hood, remove the trim over the grille.
  • LIKE
  • 2
Author: carsoftos777 | 6-07-2023, 16:13 | How To Remove Bumpers | Views: 412 | Comments: 0


Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, caps and latches.
  • LIKE
  • 2
Author: carsoftos777 | 6-07-2023, 15:54 | How To Remove Bumpers | Views: 433 | Comments: 0
How to remove front and rear bumper BMW 7-series E38


-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the bolts (8mm) that attach the fender liner to the bumper.
-at the edges of the fog lights, closer to the center of the bumper, Unscrew one bolt (under the inner sprocket) on each side (spun up).
-in the lower part at the corners of the bumper, depress the latches and pull the bumper slightly forward.
  • LIKE
  • 2
How to remove front and rear bumper Volvo S60 V70 XC70 (2000-2009)


-Unscrew the nuts and remove the headlight wipers (if any).
-open the hood.
-under the hood take out the six caps that secure the top.
-with a flat screwdriver, pry off the lining (you can not completely remove the lining, you need to get access to the bolts).
  • LIKE
  • 2
How to remove the front and rear bumper Subaru Legacy BL, BP (Outback) (2003-2009)


-open the hood.
-under the hood, Unscrew the screws and take out the caps that secure the grille and the upper part of the bumper.
-release from the latches and pull out the front grille.
-turn the wheels, depending on which side we will disassemble.
-in the wheel arches release the fender liner.
  • LIKE
  • 2
Author: carsoftos777 | 29-06-2023, 22:13 | How To Remove Bumpers | Views: 528 | Comments: 0


Bumper mounts.

  • LIKE
  • 2