-Unscrew the nuts and remove the headlight wipers (if any).
-open the hood.
-under the hood take out the six caps that secure the top.
-with a flat screwdriver, pry off the lining (you can not completely remove the lining, you need to get access to the bolts).
-under the overlays, Unscrew the bolts (depending on the year and the body, one or two on each side).
-turn the wheels to the side.
-in the wheel arches, loosen one screw on each side.
-(if any) in the lower part we take out two pistons (inserted from the bottom up).
-with an assistant, carefully release the clips in the wings.
-pulls the bumper forward (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
Rear bumper
-Open the trunk lid.
-in the trunk, remove the battery.
-remove the lining of the rear trunk panel.
-disconnect the antenna connector (if any).
-behind the skin, through the holes, unscrew the four nuts (we make sure that the nuts do not fall, it will be difficult to get).
-in the wheel wells, Unscrew the screws that secure the corners of the bumper (if any, nuts).
-in the lower part (depending on the year, the attachment points differ), unscrew the screws, drill out the rivets (if any).
-with an assistant, carefully release the latches in the wings.
-pulls the bumper back (be careful not to break the wires).
-disconnect electrical connectors (if any).

- 2
Tags: