How to Remove Front and Rear Bumper Pontiac G3

-open the hood.
-under the hood, pull out the pins that secure the radiator grille and the upper part.
-turn the wheels to the side.
- in the wheel arches we release the fender liners (front part).

- move the fender liners to the side and unscrew two screws on each side that secure the corners of the bumper to the fenders.
- unscrew the screws from the bottom side.

- unscrew the screws that secure the amplifier to the body.
-with an assistant, pull off the bumper (look at the wires).
-disconnect the electrical equipment connectors (if any).

-open the trunk lid.
-free the trim in the trunk.
-unscrew the nuts and screws that secure the sides of the bumper behind the side trim (on the inside of the fenders).
-unscrew the four screws in the trunk opening.

-unscrew the screws and pull out the pins from the bottom side.
-in the wheel arches, unscrew the screws that secure the mudguards.

-behind the mudguards, unscrew the screws that secure the bumper corners to the fenders.
-with an assistant, carefully pull off the bumper (watch the wires).
-disconnect the electrical equipment connectors.