How to Remove Front and Rear Bumper Subaru Baja

-open the hood.
-under the hood between the headlights, pull out the five pins that secure the upper part.
-along the perimeter of the lower part, pull out five pins (inserted from bottom to top).
- we turn the wheels depending on which side we will disassemble.

- we release the fender liners in the wheel arches.
- behind the fenders, unscrew one screw on each side (screwed from the bottom up), which secure the corners of the bumper to the fenders.

- with an assistant, carefully pull the bumper forward (be careful not to break the wires).
- remove the connectors from the electrical equipment (if any).

-remove the taillights.
-open the trunk door.
- we take out the pins under the rear lights and in the trunk opening.

- we take out the pins (inserted from the bottom up), which secure the lower part.
- in the trunk, unscrew the screws securing the bumper reinforcement to the body.

- with an assistant, release the latches in the fenders.

- carefully pull the bumper back.
-disconnect the electrical equipment connectors (if any).