How to Remove Front and Rear Bumper Subaru Impreza (WRX) (2011-2016)

-go under the car, pull out the pins and unscrew the screws (screwed and inserted from the bottom up), which secure the lower part of the bumper.
-open the hood.
-under the hood, pull out six pins that secure the upper part.

-turn the wheels depending on which side we are going to disassemble.
- in the wheel arches, we take out the pins that secure the fender liners and bumper corners to the fenders.

- we release the latches in the fenders and under the headlights (pull the corners towards us).

- with an assistant, carefully pull the bumper forward (be careful not to break the wires).
- remove the connectors from the fog lights and parking sensors (if any).

Rear bumper

- open the trunk lid (rear door).
- pull out the pins along the perimeter of the lower part (inserted from bottom to top).
- in the wheel arches, pull out the pins that attach the fender liners and bumper corners to the fenders.
- release the latches in the wings (pull the corners towards you).

- release the latches under the rear lights (lift the bumper up and pull towards you). If it doesn't work, remove the rear lights:

- In 4-door models, remove the trim and unscrew the nuts from the trunk.
-In 5-door models, unscrew the screws in the trunk opening and release them from the latches (pull them towards you).

- With an assistant, carefully pull the bumper back.
- Disconnect the parking sensor connectors (if any).
Tags: