How to remove the front and rear bumper Skoda Felicia

Depending on the year of manufacture and model variant, the mounting locations may differ slightly.

- in models up to '98, remove the turn signals and unscrew the radiator grille mounting screws. Unscrew the screws under the hood and remove the radiator grille.
- in models after '98, unscrew the screws and remove the decorative trims between the headlights and the bumper.
- in the opening between the headlights, unscrew one nut on each side in the corners.
- from under the car, unscrew the bumper mounting screws to the body.
- unscrew the wheels to the left or right, depending on which side you will disassemble.

-in the wheel arches, unscrew the screws that secure the fender liners to .
-move the fender liners to the side and loosen the screws securing the supports and pull the bumper forward.
-remove the connectors from the fog lights (if any).
-if there are headlight washers, disconnect the hose and plug it with a plug so that liquid does not leak out of the tank.

Rear bumper

Depending on the year of manufacture and model variant, the mounting locations may differ slightly.

- open the trunk lid, remove the plugs in the opening and unscrew the four nuts.
- unscrew the screws around the perimeter at the bottom (screwed from bottom to top).
- unscrew the screws in the wheel arches that secure the mudguards (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).

- Behind the fenders, unscrew one screw on each side that secures the corners to the fenders.
- With an assistant, pull the bumper off the guides towards you.
Tags: