- we turn the wheels to the left or right side, depending on which side we will disassemble first.
- in the wheel arches we unscrew the screws that secure the fender liners and guides to the bumper.
- under the hood in the opening between the headlights we unscrew the screws (screwed from top to bottom).
- along the perimeter of the lower part we unscrew the screws and pull out the pins (screwed and inserted from bottom to top).
-with an assistant, release the corners from the latches in the wings and remove the bumper from the guides towards you.
-remove the connector from the fog lights (if any).
-remove the connector from the parking sensors (if any).
Rear bumper
-open the trunk lid.
-unscrew in the trunk opening.
- in the wheel arches, unscrew the screws that secure the mudguards and guides to the bumper.
- unscrew the screws around the perimeter at the bottom (screwed from the bottom up).
- with an assistant, release the bumper from the latches in the fenders and under the taillights, remove it from the guides towards you.
- remove the connector from the parking sensors (if any).

- 1
Tags: