How to remove the front and rear bumper of Renault Koleos 1 (2008-2016)

Depending on the year of manufacture, the mounting locations may vary slightly.
Front bumper
-open the hood.
-under the hood, Unscrew the seven screws that secure the upper part.
-from the bottom, unscrew the screws and take out the pistons (twisted and inserted from the bottom up) that secure the bottom of the bumper.
-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches we take out the pistons and release the fender liners (front part).
-behind the fender liners, Unscrew one screw on each side (twisted from top to bottom) that secure the corners of the bumper to the wings.

-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper forward (make sure not to tear the wires and hoses).
-remove the connectors of the fog lights (if any).
-disconnect the headlight washer hoses (if equipped)

Rear bumper

-open the trunk lid.
-in the trunk opening, unscrew the screws and remove the rear lights.
-in the trunk opening we take out four pistons
-Unscrew the screws and take out the pistons that secure the lower part.
-in the wheel arches we take out the pistons and release the fender liners (rear part).
-behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.

-release the latches in the wings (pull the corners towards you, they sit tightly).
-with an assistant, pull the bumper back (watch the wires).
- disconnect the connectors of the electrical equipment.
Tags: