How to remove front and rear bumper Peugeot Partner (Citroën Berlingo) (1996-2002)

-open the hood.
-under the hood, Unscrew the screws, take out the caps and remove the grille.

-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble turn the wheels.
-in the wheel arches release the fender liner.
-Unscrew two screws on each side that attach the corners to the wings.

-from the side of the engine compartment, Unscrew the screws that secure the amplifier to the body (if the bumper does not come off the amplifier).
-pulls the bumper forward (be careful not to break the wires).
-remove connectors from electrical equipment (if any).

Rear bumper

-open the lid (doors) of the trunk.
-in the opening of the trunk, Unscrew the five screws.
-remove the rear lights.

-under the rear lights, Unscrew one screw on each side.
-in the wheel wells, Unscrew the screws that attach the corners to the wings.
-Unscrew the screws that secure the bottom.
-carefully pull the bumper back.
Tags: