How to remove front and rear bumper Chevrolet Epica (2003-2006)

-open the hood.
-under the hood take out the caps and Unscrew the screws that secure the top.
-Unscrew the screws and remove the headlights.
-in the openings of the headlights, Unscrew the screws and take out the caps.

-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner.
-Unscrew one screw on each side (spun up). Which attach the corners to the wings.

-around the perimeter at the bottom, take out the caps.
-pulls the bumper forward (be careful not to break the wires).
-remove the connector from the electrical equipment (if any).

Rear bumper

-Open the trunk lid.
-remove the side trim.
- behind the skins, unscrew two screws on each side (spun from top to bottom), which fasten the sidewalls to the wings.
-Unscrew the nuts and remove the rear lights.

-take out the caps in the opening of the trunk and under the rear lights.
-Unscrew the screws around the perimeter of the bottom.

-Unscrew the screws in the wheel arches and release the fender liner.
- unscrew one screw on each side (spun up) that attach the corners to the wings.

-remove the bumper from the guides back.
-remove connectors from electrical equipment (if any).
Tags: