How to remove the front and rear bumper Chevrolet Cobalt

-open the hood.
-under the hood take out the caps (maybe screws) that secure the top.
-turn the wheels to the left or right side, depending on which side we will disassemble first.

-in the wheel wells, Unscrew three screws on each side that secure the fender liner.
-remove the fender liner to the side and Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-around the bottom, take out the caps and Unscrew the screws (twisted and inserted from the bottom up).
-with an assistant, release the corners from the latches in the wings (pull towards you).

-pull the bumper forward.
-remove the connector from the fog lights (if any).

Rear bumper

-Open the trunk lid.
-(sedan) in the opening of the trunk, Unscrew the four screws that secure the rear lights.
-in the trunk, we release the side trim.
-for the skins, Unscrew the nuts and remove the taillights.
-under the tail lights, under the tail lights, Unscrew the screws and release the latches.
-Unscrew the screws (take out the caps) in the opening of the trunk.
-Unscrew the screws and take out the caps at the bottom (twisted and inserted from the bottom up).
-Unscrew the screws in the wheel arches and release the fender liner.
-for the fender liner, Unscrew one screw on each side that attach the corners to the wings (if any).

-with an assistant, release the latches in the wings (pull the corners towards you).
-remove the bumper from the guides back.
-remove connectors from electrical equipment (if any).
Tags: