You can use Cartool to recover airbag files, calculate Immo, radio code, emulators; Read and calculate PIN-code; Create a new airbag memory file if you lost the original, etc.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 13-06-2021, 02:27 | Programs for cars and diagnostics | Views: 1 987 | Comments: 0
Author: carsoftos777 | 7-05-2021, 03:23 | Programs for cars and diagnostics | Views: 2 363 | Comments: 0
NIStune is a real-time tuning suite designed especially for Nissans which provides the ability to:
• Retune factory Nissan Engine Control Units (ECU)
• Monitor gauges and map tracing on your ECU
• Data log from your ECU using consult, wideband and auxiliary inputs
• Perform playback using graphs, gauges and map tracing
• Retune factory Nissan Engine Control Units (ECU)
• Monitor gauges and map tracing on your ECU
• Data log from your ECU using consult, wideband and auxiliary inputs
• Perform playback using graphs, gauges and map tracing
Author: carsoftos777 | 7-05-2021, 02:28 | Programs for cars and diagnostics | Views: 1 437 | Comments: 0
Software to remove crashdata from airbag ECU dumps. It covers over 110 airbag ECU models.
Author: carsoftos777 | 7-05-2021, 02:15 | Programs for cars and diagnostics | Views: 12 377 | Comments: 0
EFfI - Second Life for Zed-Bull clone add a lot more models to the traditional Zed-Bull, this software can work with all clones and original devices:
1.- Finding PIN Code, preparing precoded transponders and programming transponders from EEPROM and MCU.
2.- Transponder Cloning.
3.- Producing Transponders for OBD Programming.
4.- Hitag2 Transponder Programmer.
1.- Finding PIN Code, preparing precoded transponders and programming transponders from EEPROM and MCU.
2.- Transponder Cloning.
3.- Producing Transponders for OBD Programming.
4.- Hitag2 Transponder Programmer.
Author: carsoftos777 | 7-05-2021, 01:49 | Programs for cars and diagnostics | Views: 3 462 | Comments: 0
Professional EGR Remover is a software for decoding ECU / IMMO OFF / Recirculation hot start and shutdown by editing Flash / EEPROM dump files.
Author: carsoftos777 | 7-05-2021, 00:18 | Programs for cars and diagnostics | Views: 2 920 | Comments: 0
Author: carsoftos777 | 6-05-2021, 23:25 | Programs for cars and diagnostics | Views: 8 158 | Comments: 0
Volta sensor decoding is done through obd2repair utility without limitation, can help you unlock, delete, delete and reset EPROM, EEPROM, Flash, MCU or Xrom of ECUs.
Author: carsoftos777 | 4-05-2021, 22:41 | Programs for cars and diagnostics | Views: 4 019 | Comments: 0
FiatEcuScan is an advanced software diagnostic tool. This allows you to perform various diagnostic tasks on supported vehicles / modules. In order to use the software, you need an interface. The following interfaces are currently supported by software: KL (also known as VAGCOM 409), ELM327 (1.3 or newer), OBDKey 1.40, OBDLink, ELM Scan 5, CANtieCAR.
Author: carsoftos777 | 4-05-2021, 22:17 | Programs for cars and diagnostics | Views: 4 893 | Comments: 0
Otocheck is an advanced tool for repairing Immobilizer problems in vehicles with faulty ECU or IMMO boxes or in a situation where all keys have been lost. It can also be used for light vehicles where an engine donor or ECU swap out was used. This is an advance tool with a comprehensive coverage a must for all lock smiths and ECU repair stations worldwide.
Author: carsoftos777 | 4-05-2021, 22:06 | Programs for cars and diagnostics | Views: 4 059 | Comments: 0
