Navigation

Top News

Statistics

Advertisement

СarSoftos.com » Programs for cars and diagnostics » Page 176

ScanMaster-ELM V2.1 Full + Operation Manual

Author: carsoftos777 | 4-08-2021, 02:11 | Programs for cars and diagnostics | Views: 3 548 | Comments: 0


The program is designed for car diagnostics according to OBD-II / EOBD standards, which were developed specifically for ELM327 chip, from ELM Electronics and supports all OBD-2 diagnostic communication protocols, such as SAE J1850 (PWM & VPW), ISO15765, CAN, ISO9141 and ISO14230.
  • LIKE
  • 1
More details

ODIS 3.0.3 + PostSetup 9.3.10 Full

Author: carsoftos777 | 4-08-2021, 01:13 | Programs for cars and diagnostics | Views: 3 946 | Comments: 0


Description: ODIS Service - Offboard Diagnostic Information System Service for VAG (Audi, VW, Seat, Skoda, Lamborgini, Bentley) can be installed on VAS 5051B, VAS 5052A, VAS 6150, VAS 6150A, VAS 6150B, VAS 6160 or standard desktop or laptop computers and used with VAS5054a, VAS 5055, CarDAQ-Plus, iFlash, PassThru SAE J2534.
  • LIKE
  • 1
More details

Honda HDS 3.102.029 + J2534 Rewrite 1.1.0.2 [2017]

Author: carsoftos777 | 3-08-2021, 02:45 | Programs for cars and diagnostics | Views: 3 057 | Comments: 0


Description: The official program for the diagnosis of Honda vehicles. And also the official program for firmware with databases dated July 12, 2017 (USA).
  • LIKE
  • 1
More details

ODIS-Service 5.1.6 + PostSetup 89.5.60 + ODIS-Service update 5.1.6 Full

Author: carsoftos777 | 3-08-2021, 02:35 | Programs for cars and diagnostics | Views: 11 165 | Comments: 0


Description: ODIS Service (Offboard Diagnostic Information System Service) dealership software for working with VAG-group cars (Audi, VW, Seat, Skoda, Lamborgini, Bentley).
Can be installed on VAS 5051B, VAS 5052A, VAS 6150, VAS 6150A, VAS 6150B, VAS 6160 or standard desktop or laptop computers and used with VAS5054a, VAS 5055, CarDAQ-Plus, iFlash, PassThru SAE J2534.
  • LIKE
  • 10
More details

USB driver Autocom cdp pro cars

Author: carsoftos777 | 3-08-2021, 02:21 | Programs for cars and diagnostics | Views: 2 105 | Comments: 0


USB driver for Autocom cdp pro cars.
  • LIKE
  • 1
More details

OP-COM 120309a [2012] Full

Author: carsoftos777 | 2-08-2021, 21:22 | Programs for cars and diagnostics | Views: 2 717 | Comments: 0


Description: The hardware and software complex is designed for diagnostics of electronic equipment of Opel / Vauxhall / Holden cars from 1992 to 2012.
  • LIKE
  • 2
More details

Diagnostic complex VCDS 11.11.3

Author: carsoftos777 | 2-08-2021, 18:05 | Programs for cars and diagnostics | Views: 2 305 | Comments: 0


The VCDS 11.11.3 diagnostic complex is a further development of the well-known VAG-COM with a HEX-USB + CAN adapter and is used to diagnose cars of the VAG group (VW, Audi, Seat, Skoda until 2012)
  • LIKE
  • 1
More details

TECU v3.7.0.11 diagnostic program

Author: carsoftos777 | 2-08-2021, 17:28 | Programs for cars and diagnostics | Views: 2 819 | Comments: 0


TECU v3.7.0.11 is designed to diagnose almost all cars. Works with both regular K-line adapter and ELM327 adapter.
At the moment, the program supports diagnostics of the main blocks of Toyota cars starting somewhere in 1996 (when the K-line appeared on the car) and around 2006 (before cars switched to the CAN bus). I would like to draw your attention to the fact that for Toyota there are diagnostic modules for hybrid vehicles in the program. For Toyota, all protocol parameters are taken from the dealer-level program - Techstream. In addition to Toyota, the program has support for diagnostics of Nissan vehicles (so far through the K-line). The protocol for Nissan has been collected bit by bit from various sources and is currently from the dealer's CONSULT-III instrument. For Daihatsu vehicles with HC-EJ engine, the protocol is taken from a multiscanner that supports this type of engine.
  • LIKE
  • 1
More details

VAG K+CAN Commander 1.4 Full

Author: carsoftos777 | 2-08-2021, 17:06 | Programs for cars and diagnostics | Views: 9 177 | Comments: 0


VAG K + CAN Commander 1.4 VAG K + CAN Commander is used to correct odometers, read vehicle security access codes, reset airbag errors, activate the TV in motion (VIM) function on VAG vehicles.
  • LIKE
  • 2
More details

Vag com 409.1 car diagnostic program Full

Author: carsoftos777 | 2-08-2021, 16:41 | Programs for cars and diagnostics | Views: 2 519 | Comments: 0


Vag com 409.1 is a car diagnostics program, version 409.1, this program is unique and has no analogues in its segment, the bulk of people use this particular program in car diagnostics - due to its fairly large capabilities, a simple and intuitive interface.
  • LIKE
  • 1
More details