СarSoftos.com » Programs for cars and diagnostics » PyClip 3-0.02.07 Renault car diagnostics

PyClip 3-0.02.07 Renault car diagnostics

Author: carsoftos777 | 6-06-2024, 14:55 | Programs for cars and diagnostics | Views: 192 | Comments: 0 | Found a bug?

Description: RENAULT diagnostics using ELM327.
For the application to work correctly, an ELM327 adapter with hardware version 1.5 is required, which must support Flow Control.

Program features

Reading all parameters from all vehicle control units - engine, transmission, etc.
Reading and decoding of all fault codes and parameters while fixing an error.
Testing of sensors and actuators.
Configuring control units.
How to use

To use the application you will need an ELM327 adapter - original or Chinese with chip version 1.5. On Android 8 and higher, the connection with the Bluetooth version of the adapter is possible; in this case, it is better to use the WI-FI version. While working with WI-FI ELM327, the Internet will not be available.

Start screen

START - Start the program.
ELM port — adapter port, or Wi-Fi adapter address. The Wi-Fi address is specified in the IP:port format of the adapter.
Language - language.
Demo mode - launch the script in demo mode with the savedEcus.p file saved
DUMP - saving a block dump. It is recommended to do this before any changes to parameters in the machine to be able to correct unexpected consequences of such changes.
Orientation landscape - launch in portrait mode.
Scan vehicle—select a car model.
Generate logs - enable the logging function. The log file may be necessary to analyze the error, check the block address, and other cases.
Log name — Log file name.
CAN2 (Multimedia CAN) - use of the CAN2 bus with the appropriate adapter. Where the multimedia is located.
Font size — The font size in the program.
KWP Force Slow lnit - use the slow-init parameter for blocks of older versions. If you have a car before 2009 with an unstable connection, it is better to activate it.
Use CFC0 - software flow-control, enable if the ELM327 adapter does not support hardware.

Control block structure

DE: Device errors - reading, deleting errors.
ID: Identifications - checking the VIN of the unit, firmware version, equipment, etc.
SY: System state - displays current main readings (rpm, voltage, temperature, etc.).
SP: System parameters - displays the current parameters of the block, without the possibility of changing.
LC: System configuration - output of the current configuration, without the possibility of changing.
AC: Executing tests - running test scripts for the unit (for example, check all the dashboard lights, relays, etc.).
CF: Changing configuration - Changing the configuration of the block. CAREFULLY!
VP: VIN programming - programming VIN hardwired into each block.
RZ: Resets - Resets all block and calibration errors.
ECM: Extended command set are configuration scripts. Most of it does not work (probably while the script is being finalized), but you can familiarize yourself with the principles of operation using the “show” command and after the phrase “There is scenarium. I don’t support them!” press "enter" when prompted.

- Fix errors according to the latest descriptions;
- changes according to the wishes of opening scenarios

PyClip 3-0.02.07 Renault car diagnostics
  • LIKE
  • 0

Users of Guests are not allowed to comment this publication.