Navigation

Top News

  • BMW ISTA+ 4.58.41 [04.2026] Full
  • PsdZData v4.59.10 Full [2026]
  • Citroen C4 Picasso 1.6 HDI firmware from Autotems
  • E-Sys 25.10.03 [2026] Full
  • OBDeleven 0.107.0 Full
  • E OBD2 Facile 3.85.1166 Full
  • OBDeleven 0.105.0 Full
  • Firmware Hyundai i30 EDC17C08 - IMMO off
  • Car Won’t Start But Battery Is Good: What Could Be Wrong?
  • BMW ICOM Firmware Update [BMW ICOM and ICOM Next Firmware Update]

    • Statistics

    Advertisement

    СarSoftos.com » Page 343

    How to remove front and rear bumper Renault Megane 3 (2008-2015)

    Author: carsoftos777 | 28-01-2023, 15:36 | How To Remove Bumpers | Views: 1 743 | Comments: 0


    -open the hood.
    -under the hood, Unscrew the six screws (spun down) that secure the top of the bumper.
    -Unscrew two screws on each side, pull up the metal clips and remove the headlights.
    -Unscrew the five screws that secure the lower part of the bumper (spun up).
    -depending on which side we will disassemble, turn the wheels.
    • LIKE
    • 3
    More details

    Carly OBD2 for BMW and Others 48.56 Full

    Author: carsoftos777 | 22-01-2023, 02:47 | Programs for cars and diagnostics | Views: 823 | Comments: 0
    Carly OBD2 for BMW and Others 48.56 Full


    Description: A program for testing the computer of BMW cars.
    Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper Chevrolet Orlando

    Author: carsoftos777 | 22-01-2023, 02:46 | How To Remove Bumpers | Views: 1 092 | Comments: 0
    How to remove the front and rear bumper Chevrolet Orlando


    -open the hood.
    -under the hood take out eight caps and remove the trim.
    -under the trim, Unscrew the four screws.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper Chevrolet Aveo (T200, T250)

    Author: carsoftos777 | 22-01-2023, 02:43 | How To Remove Bumpers | Views: 528 | Comments: 0
    How to remove the front and rear bumper Chevrolet Aveo (T200, T250)


    -open the hood.
    -under the hood take out the caps, Unscrew the screws that secure the top.
    -turn out the wheels, depending on which side we will disassemble.
    -in the wheel wells, Unscrew the screws that secure the fender liner.
    -Unscrew the screws (spun up) that secure the corners to the wings.
    -at the bottom, Unscrew the screws (spun up) that secure the sides.
    • LIKE
    • 3
    More details

    How to remove front and rear bumper Peugeot Partner Tepee (Citroën Berlingo B9) (after 2009)

    Author: carsoftos777 | 22-01-2023, 02:41 | How To Remove Bumpers | Views: 1 862 | Comments: 0
    How to remove front and rear bumper Peugeot Partner Tepee (Citroën Berlingo B9) (after 2009)


    -open the hood.
    -under the hood, Unscrew the screws and take out the caps (twisted and inserted from top to bottom) that secure the top.
    -on the perimeter of the lower part, Unscrew the screws and take out the caps (twisted and inserted from the bottom up).
    • LIKE
    • 3
    More details

    DEUTZ FAHR, HURLIMANN, LAMBORGHINI, SAME Agriculture parts catalog and service book 2016 [Multi]

    Author: carsoftos777 | 18-01-2023, 03:16 | Programs for cars and diagnostics | Views: 9 593 | Comments: 0


    Description: Agriculture parts catalog and service book DEUTZ FAHR, HURLIMANN, LAMBORGHINI.
    • LIKE
    • 4
    More details

    How to remove front and rear bumper BMW X5 E70

    Author: carsoftos777 | 18-01-2023, 03:14 | How To Remove Bumpers | Views: 664 | Comments: 0
    How to remove front and rear bumper BMW X5 E70


    -open the hood and unscrew the five screws in front of the radiator.
    -the entire length of the lower part of the bumper, Unscrew the screws.
    -Unscrew the wheels left or right, depending on which side you will unscrew first.
    -in the wheel wells, Unscrew the screws that secure the fender liner to the bumper.
    -we release the edges of the bumper and the upper part under the headlights from the latches and pull it forward (it is better to do this with an assistant).
    BMW X5 E70 front bumper mounting diagram - if there is a parking sensor, remove the common connector.
    -bumper removed.
    • LIKE
    • 4
    More details

    How to remove the front and rear bumper of a Chevrolet Captiva

    Author: carsoftos777 | 18-01-2023, 03:10 | How To Remove Bumpers | Views: 1 153 | Comments: 0
    How to remove the front and rear bumper of a Chevrolet Captiva


    -under the hood take out the caps that secure the trim and Unscrew the two screws that secure the top.
    -turn the wheels to the left or right side, depending on which side we will disassemble first.
    -in the wheel wells, Unscrew the screws that secure the fender liner.
    -remove the fender liner to the side and Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
    -on the perimeter at the bottom, Unscrew the screws (spun up).
    -with an assistant, release the corners from the latches in the wings (pull towards you).
    -pull the bumper forward.
    • LIKE
    • 3
    More details

    Carly OBD2 for BMW and Others 48.54 Full

    Author: carsoftos777 | 16-01-2023, 03:10 | Programs for cars and diagnostics | Views: 668 | Comments: 0
    Carly OBD2 for BMW and Others 48.54 Full


    Description: A program for testing the computer of BMW cars.
    Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
    • LIKE
    • 3
    More details

    How to remove front and rear bumper BMW 1-series (E81, E82, E87, E88)

    Author: carsoftos777 | 16-01-2023, 03:06 | How To Remove Bumpers | Views: 1 267 | Comments: 0
    How to remove front and rear bumper BMW 1-series (E81, E82, E87, E88)


    Front bumper
    attachment points for the front bumper of the BMW 1-series (E81, E82, E87, E88) - under the hood, unscrew the four screws that secure the bumper to the top bar.
    -at the bottom of the bumper along the entire length, Unscrew the nine screws.
    -Unscrew the wheels left or right, depending on which side you will unscrew first and Unscrew the screws that attach the fender liner to the bumper.
    -move the fender liner to the side and Unscrew two bolts on each side (usually under an asterisk) that secure the bumper to the wing (spun up).
    • LIKE
    • 3
    More details