Description: An updated version of ODIS Service 11.0 for diagnosing electronic control units for cars of the VAG group (VW Audi Skoda Seat Bentley Lamborghini).
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 7-03-2023, 02:46 | Programs for cars and diagnostics | Views: 11 495 | Comments: 0
Author: carsoftos777 | 5-03-2023, 20:16 | Programs for cars and diagnostics | Views: 1 077 | Comments: 0
BimmerCode 4.12.1-10953 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
To remove the front bumper, you usually need to unscrew only two bolts (under the internal hex), which are twisted from the bottom up. If the bolts are stuck or the edges are licked, you can unscrew the mounting plates on the bumper (two nuts per side), or disconnect the shock absorbers themselves (three nuts per side), although these options are much more complicated than the main one.
-open the hood.
-under the hood, Unscrew the screws, release the latches and remove the grille.
-on the perimeter of the lower part, Unscrew the screws that secure the protection.
-under the hood, Unscrew the screws, release the latches and remove the grille.
-on the perimeter of the lower part, Unscrew the screws that secure the protection.
Author: carsoftos777 | 27-02-2023, 02:09 | Programs for cars and diagnostics | Views: 5 397 | Comments: 1
Description: Renault Can Clip software, which is a service software that performs maintenance and diagnostics of Renault and Dacia cars. Using the software, it is possible to carry out a complete diagnosis of the ECU of machines (automatic transmission, engine-injector, standard xenon, ABS + ESP, climate control, airbags, dashboard, TsKBES).
-open the hood.
-under the hood, Unscrew the screws and take out the caps that secure the trim.
-Unscrew the screws that secure the top.
-around the perimeter of the lower part, Unscrew the screws that secure the lower part.
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches, Unscrew the screws and release the fender liner (completely can not be removed).
-under the hood, Unscrew the screws and take out the caps that secure the trim.
-Unscrew the screws that secure the top.
-around the perimeter of the lower part, Unscrew the screws that secure the lower part.
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches, Unscrew the screws and release the fender liner (completely can not be removed).
-open the hood.
-under the hood, Unscrew the four screws (spun down) that secure the top.
-Unscrew the screws around the perimeter of the bottom.
-under the hood, Unscrew the four screws (spun down) that secure the top.
-Unscrew the screws around the perimeter of the bottom.
Author: carsoftos777 | 26-02-2023, 02:23 | Programs for cars and diagnostics | Views: 1 298 | Comments: 1
Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Depending on the body type, the attachment points may differ.
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws and caps.
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws and caps.