-open the hood and take out the caps (inserted from top to bottom) that secure the upper part of the bumper (to get the cap you need to press its central part inward until it clicks)
-Unscrew the screws at the bottom (spun up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner and lining on the wings.
-move the fender liner to the side and Unscrew the screws that attach the corners to the wings.

More details

Disk Image) [2022]

Author: carsoftos777 | 5-02-2023, 04:05 | Programs for cars and diagnostics | Views: 4 564 | Comments: 0

Description:
– New versions of Porsche Piwis Tester (41.400 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
— Guided troubleshooting for 2021 (Online and Offline);

More details

BimmerCode 4.11.1-10917 for BMW and Mini Full

Author: carsoftos777 | 3-02-2023, 04:15 | Programs for cars and diagnostics | Views: 2 033 | Comments: 0

BimmerCode 4.11.1-10917 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.

More details

How to remove front and rear bumper of Chevrolet Spark (Matiz)/ Daewoo Matiz (2005-2009)

Author: carsoftos777 | 2-02-2023, 23:06 | How To Remove Bumpers | Views: 534 | Comments: 0

-open the hood.
-under the hood take out four pistons.
-on the perimeter of the lower part we take out the caps.
-turn the wheels to the left or right side, depending on which side we will disassemble first.

More details

PET 2 Porsche 8.0 (699) 01.2023 + vin code base 20046 pcs. Full

Author: carsoftos777 | 2-02-2023, 21:30 | Programs for cars and diagnostics | Views: 1 572 | Comments: 0

Description: The original catalog of spare parts for Porsche cars.

More details

How to remove front and rear bumper BMW 5-series E34

Author: carsoftos777 | 2-02-2023, 04:37 | How To Remove Bumpers | Views: 420 | Comments: 0

-remove the side moldings. The front half of the molding is snap-on, you need to pry it off with a screwdriver and pull it towards you. The side half of the molding is hooked, it just pulls together.
-under the moldings, Unscrew the four nuts, two on each side.
-in the wheel arches, you need to pry off the edges of the fender liner and pull them out over the edges of the bumper.
-remove the connectors from the fog lights (if any)
-remove the temperature sensor (in the bumper grille closer to the left side).

More details

How to remove front and rear bumper Peugeot 3008

Author: carsoftos777 | 2-02-2023, 04:35 | How To Remove Bumpers | Views: 1 307 | Comments: 0

-open the hood.
-under the hood, under the hood, Unscrew the screws and take out the caps (twisted and inserted from top to bottom).
-we release the upper part from the latches.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-turn the wheels to the side.

More details

Ksuite 2.80 [2022] Full

Author: carsoftos777 | 1-02-2023, 20:39 | Programs for cars and diagnostics | Views: 5 433 | Comments: 0

Description: KSuite 2.80 for Kess 5.017 and Ktag.
A copy of the disk supplied with the device by sellers from Aliexpress. The disk includes programs ECM Titanium-SS77-B, Winols_24, KSuite v2.47 Setup Full-HT 2018-07-10.

More details

How to remove front and rear bumper Chevrolet Camaro (2009-2015)

Author: carsoftos777 | 30-01-2023, 04:25 | How To Remove Bumpers | Views: 567 | Comments: 0

-open the hood.
-under the hood take out six caps and Unscrew the two screws that secure the top.
-turn out the wheels, depending on which side we will disassemble.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner.
-remove the fender liner to the side and Unscrew two screws on each side (one screwed from the bottom up and one screwed from the engine side).

More details

How to remove front and rear bumper Peugeot 806 (Fiat Ulysse, Citroën Evasion, Lancia Zeta)

Author: carsoftos777 | 30-01-2023, 04:22 | How To Remove Bumpers | Views: 706 | Comments: 0

-open the hood.
-under the hood, Unscrew the screws, release the latches and remove the grille.
-release the latches and pull out the direction indicators.
-Unscrew three screws on each side and remove the headlights.

More details

Navigation

Top News

Statistics

Advertisement

Аrchives

Votes