Description: Dealer diagnostic software for Toyota, Lexus, Scion.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 5-02-2023, 04:43 | Programs for cars and diagnostics | Views: 5 641 | Comments: 0
Depending on the year of manufacture and body type, the attachment points may differ.
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, nuts and latches.
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, nuts and latches.
-open the hood and take out the caps (inserted from top to bottom) that secure the upper part of the bumper (to get the cap you need to press its central part inward until it clicks)
-Unscrew the screws at the bottom (spun up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner and lining on the wings.
-move the fender liner to the side and Unscrew the screws that attach the corners to the wings.
-Unscrew the screws at the bottom (spun up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner and lining on the wings.
-move the fender liner to the side and Unscrew the screws that attach the corners to the wings.
Author: carsoftos777 | 5-02-2023, 04:05 | Programs for cars and diagnostics | Views: 4 521 | Comments: 0
Description:
– New versions of Porsche Piwis Tester (41.400 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
— Guided troubleshooting for 2021 (Online and Offline);
– New versions of Porsche Piwis Tester (41.400 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
— Guided troubleshooting for 2021 (Online and Offline);
Author: carsoftos777 | 3-02-2023, 04:15 | Programs for cars and diagnostics | Views: 2 022 | Comments: 0
BimmerCode 4.11.1-10917 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
-open the hood.
-under the hood take out four pistons.
-on the perimeter of the lower part we take out the caps.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-under the hood take out four pistons.
-on the perimeter of the lower part we take out the caps.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
Author: carsoftos777 | 2-02-2023, 21:30 | Programs for cars and diagnostics | Views: 1 567 | Comments: 0
-remove the side moldings. The front half of the molding is snap-on, you need to pry it off with a screwdriver and pull it towards you. The side half of the molding is hooked, it just pulls together.
-under the moldings, Unscrew the four nuts, two on each side.
-in the wheel arches, you need to pry off the edges of the fender liner and pull them out over the edges of the bumper.
-remove the connectors from the fog lights (if any)
-remove the temperature sensor (in the bumper grille closer to the left side).
-under the moldings, Unscrew the four nuts, two on each side.
-in the wheel arches, you need to pry off the edges of the fender liner and pull them out over the edges of the bumper.
-remove the connectors from the fog lights (if any)
-remove the temperature sensor (in the bumper grille closer to the left side).
-open the hood.
-under the hood, under the hood, Unscrew the screws and take out the caps (twisted and inserted from top to bottom).
-we release the upper part from the latches.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-turn the wheels to the side.
-under the hood, under the hood, Unscrew the screws and take out the caps (twisted and inserted from top to bottom).
-we release the upper part from the latches.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-turn the wheels to the side.
Author: carsoftos777 | 1-02-2023, 20:39 | Programs for cars and diagnostics | Views: 5 357 | Comments: 0
Description: KSuite 2.80 for Kess 5.017 and Ktag.
A copy of the disk supplied with the device by sellers from Aliexpress. The disk includes programs ECM Titanium-SS77-B, Winols_24, KSuite v2.47 Setup Full-HT 2018-07-10.
A copy of the disk supplied with the device by sellers from Aliexpress. The disk includes programs ECM Titanium-SS77-B, Winols_24, KSuite v2.47 Setup Full-HT 2018-07-10.