Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.

More details

How to remove front and rear bumper Alfa Romeo 145 (146)

Author: carsoftos777 | 7-04-2023, 13:40 | How To Remove Bumpers | Views: 478 | Comments: 0

-open the hood.
-under the hood take out the caps and remove the trim over the grille.

More details

How to remove the front and rear bumper AUDI A8 D3

Author: carsoftos777 | 7-04-2023, 13:17 | How To Remove Bumpers | Views: 477 | Comments: 0

The bumper is removed together with the grille (beard).

-under the hood, Unscrew the upper bolts that secure the grille and the upper part of the bumper to the body.
-at the very bottom of the bumper along the entire length we take out the caps that secure the engine protection and fender liner.
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-in the wheel arches, Unscrew the screws and take out the caps that attach the fender liner to the bumper.
-Now the hardest part, you need to unscrew the three nuts on each side that attach the bumper to the fenders. You will need a head for 10 with an extension cord (about 30 cm) and a ratchet. Move the fender liner to the side and unscrew the nuts. In some models, depending on the engine, there may be a washer reservoir or a charcoal filter under the wing, which make it difficult to access the nuts.

More details

Porsche Piwis 3 41.500 + 38.250 for VAS 6154 / VMware [2023]

Author: carsoftos777 | 7-04-2023, 13:12 | Programs for cars and diagnostics | Views: 6 480 | Comments: 5

Description:
– New versions of Porsche Piwis Tester (41.500 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
— Guided troubleshooting for 2021 (Online and Offline);
– Adaptation and coding of electronic units and components of the car;
- Activation / deactivation of components, as well as hidden functions of the car;
– Retrofitting of cars, automatic and manual coding of new elements;
- Removing the protection of components (requires online access to PPN);
— Immobilizer and key programming (requires online access to PPN);

More details

How to remove the front and rear bumper AUDI A8 D4

Author: carsoftos777 | 7-04-2023, 13:06 | How To Remove Bumpers | Views: 613 | Comments: 0

The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.

-under the hood take out the caps and remove the trim over the grille.
-Unscrew the screws under the trim (spun down).
-Unscrew the screws around the perimeter at the bottom (spun up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner.

More details

How to remove front and rear bumper Volvo S60, XC60, XC70 (after 2010)

Author: carsoftos777 | 7-04-2023, 13:00 | How To Remove Bumpers | Views: 816 | Comments: 0

-open the hood.
-under the hood, remove the trim (if any).
-take out nine caps (inserted from top to bottom) that secure the top.
-turn the wheels to the side.
-wheel arches take out five caps (maybe screws) on each side and one screw that attach the corners to the wings.
-at the bottom, take out the three pistons (inserted from the bottom up).

More details

Carista 7.2 Pro Full

Author: carsoftos777 | 31-03-2023, 16:37 | Programs for cars and diagnostics | Views: 2 198 | Comments: 0

More details

How to remove front and rear bumper Peugeot 308

Author: carsoftos777 | 31-03-2023, 16:26 | How To Remove Bumpers | Views: 2 114 | Comments: 0

-open the hood.
-under the hood, take out the caps and Unscrew the screws (inserted and screwed down) that secure the top.
-we release the upper part from the latches (in the places indicated by the arrows you need to press with a flat screwdriver).
-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew one screw on each side (spun down) that attach the corners of the bumper to the wings.

More details

How to remove front and rear bumper Peugeot 5008

Author: carsoftos777 | 31-03-2023, 16:22 | How To Remove Bumpers | Views: 959 | Comments: 0

-open the hood.
-under the hood, Unscrew the two screws and take out the two pistons that secure the top.
-around the perimeter of the lower part, Unscrew the eight screws that secure the lower part.

More details

John Deere Service Advisor 5.3.93 CF[08.2020] & AG [08.2020] + Setup [2020] Full

Author: carsoftos777 | 31-03-2023, 15:41 | Programs for cars and diagnostics | Views: 7 840 | Comments: 0

Description: John Deere Service Advisor Dealer Repair Manual, Maintenance, John Deere Wiring Diagrams.
The dealer repair base contains detailed repair manuals, electrical and hydraulic diagrams, special operating instructions for all models of equipment, operation and maintenance manuals, technical characteristics and specifications, test results for all equipment, tightening torques, filling volumes, as well as a catalog of special John Deere tool.

More details

Navigation

Top News

Statistics

Advertisement

Аrchives

Votes