-open the hood.
-under the hood, remove the trim over the grille.
-under the hood, remove the trim over the grille.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 6-07-2023, 16:23 | Programs for cars and diagnostics | Views: 6 045 | Comments: 1
Description: — New versions of Porsche Piwis Tester (41.600 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
— Guided troubleshooting for 2021 (Online and Offline);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
— Guided troubleshooting for 2021 (Online and Offline);
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, caps and latches.
-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the bolts (8mm) that attach the fender liner to the bumper.
-at the edges of the fog lights, closer to the center of the bumper, Unscrew one bolt (under the inner sprocket) on each side (spun up).
-in the lower part at the corners of the bumper, depress the latches and pull the bumper slightly forward.
-in the wheel wells, Unscrew the bolts (8mm) that attach the fender liner to the bumper.
-at the edges of the fog lights, closer to the center of the bumper, Unscrew one bolt (under the inner sprocket) on each side (spun up).
-in the lower part at the corners of the bumper, depress the latches and pull the bumper slightly forward.
Author: carsoftos777 | 4-07-2023, 00:03 | Programs for cars and diagnostics | Views: 1 866 | Comments: 0
Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
-Unscrew the nuts and remove the headlight wipers (if any).
-open the hood.
-under the hood take out the six caps that secure the top.
-with a flat screwdriver, pry off the lining (you can not completely remove the lining, you need to get access to the bolts).
-open the hood.
-under the hood take out the six caps that secure the top.
-with a flat screwdriver, pry off the lining (you can not completely remove the lining, you need to get access to the bolts).
-open the hood.
-under the hood, Unscrew the screws and take out the caps that secure the grille and the upper part of the bumper.
-release from the latches and pull out the front grille.
-turn the wheels, depending on which side we will disassemble.
-in the wheel arches release the fender liner.
-under the hood, Unscrew the screws and take out the caps that secure the grille and the upper part of the bumper.
-release from the latches and pull out the front grille.
-turn the wheels, depending on which side we will disassemble.
-in the wheel arches release the fender liner.
Author: carsoftos777 | 3-07-2023, 12:12 | Programs for cars and diagnostics | Views: 862 | Comments: 0
Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Author: carsoftos777 | 29-06-2023, 22:11 | Programs for cars and diagnostics | Views: 1 710 | Comments: 0
Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.