How to remove front and rear bumper VW Eos

-unscrew the two screws on the edges of the radiator grille under the hood and two under the license plate.
-release the two latches near the hood lock and remove the radiator grille forward.
-unscrew the four screws under the radiator grille.
-turn the wheels to the side and unscrew the screws that secure the fender liners to the bumper.

-move the fenders to the side and unscrew one screw on each side in the corners (screwed from the bottom up), and unlock the guide mounts.
-unscrew the screws around the perimeter at the bottom (screwed from the bottom up).
-with an assistant, pull the bumper forward from the guides.

-now you can disconnect the connectors from the fog lights (if any).
-remove the connector from the parking sensors (if any).
- disconnect the headlight washer hoses (if any). To prevent fluid from leaking out of the tank, you will need to plug the hoses with plugs or bend them.

Rear bumper

- open the trunk lid and remove the taillight covers (fastened with latches).
- unscrew one screw on each side under the covers.
- in the trunk, remove the edges of the side trim and unscrew the nuts securing the taillights.
- remove the taillights.

-under the rear lights, unscrew three screws on each side (screwed from top to bottom).
-unscrew the screws at the bottom (screwed from bottom to top).
-unscrew the screws in the wheel arches (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).

-behind the fenders, take out one piston on each side in the corners (screwed from bottom to top).
-with an assistant, pull the bumper back from the guides.
- remove the connector from the parking sensor (if there is one).
Tags: