How to remove front and rear bumper VW Fox

Depending on the year of manufacture, the mounting locations may differ.
- unscrew the screws around the perimeter at the bottom of the bumper (screwed from the bottom up).
- turn the wheels to the side depending on which side you will disassemble first.
- in the wheel arches, unscrew the screws that secure the fender liners.
- move the fender liners to the side and unscrew one screw on each side in the corners (screwed from the bottom up), and the screws in the headlight area (you will need a head with an extension).

-Under the hood, unscrew the screws that secure the radiator grille.
-With an assistant, pull the bumper forward from the guides.
-Now you can disconnect the connectors from the fog lights (if any).
-Remove the connector from the parking sensors (if any).

Disconnect the headlight washer hoses (if any). To prevent fluid from leaking out of the tank, you will need to plug the hoses with plugs or bend them.

Rear bumper

-unscrew the screws in the wheel arches (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).
-move the fender liners to the side and unscrew two screws (screwed from the bottom up) and one nut (approximately under the taillights) on each side.
-unscrew the screws at the bottom of the bumper (screwed from the bottom up).

-with an assistant, pull the bumper back from the guides.
-remove the connectors from the license plate light.
-remove the connector from the parking sensor (if any).
Tags: