How to remove front and rear bumper Volvo S80 1 (1998-2006)

-open the hood.
-under the hood, take out the six pins that secure the upper part.
-(if any) use a flat-head screwdriver to pry up and remove the turn signals in the pads.
-(if any) unscrew the nuts and remove the headlight wipers.
-use a flat-head screwdriver to pry up the pads (you don't have to remove the pads completely, you need to get access to the bolts).

-unscrew the bolts under the linings.
-unscrew the two bolts in the lower radiator grille (if any).
-turn the wheels to the side.

-drill out the pins in the wheel arches (if the bumper has not been removed before) and unscrew one screw at a time.
-pull out two pins at the bottom (inserted from bottom to top).

-with an assistant, carefully release the clips in the wings.
-pull the bumper forward (be careful not to tear the wires).

-remove the connectors from the electrical equipment (if any).

Rear bumper

-open the trunk lid.
-in the trunk, unscrew the screws and pull out the pins, remove the rear and side trims.
-disconnect the antenna connector.

-behind the trims, through the holes, unscrew the nuts (depending on the year, 4 or 6).
- drill out the rivets in the wheel arches and at the bottom (if the bumper has not been removed before)

- with an assistant, carefully release the latches in the fenders.
- pull the bumper back (be careful not to tear the wires).

- disconnect the electrical equipment connectors (if any).
Tags: