-open the hood.
-remove the radiator grilles.
-unscrew the two screws under the grille.
-unscrew the two screws from the engine compartment side.
-unscrew the screws that secure the bottom of the bumper.
-depending on which side we are disassembling, turn out the wheels.
-unscrew the screws in the wheel arches and release the fender liners (no need to remove).
- behind the fenders, unscrew one screw on each side that secures the corners to the fenders.
- pull the bumper forward (be careful not to tear the wires).
- remove the connectors from the electrical equipment (if any).
Rear bumper
- unscrew the three nuts that secure the bumper to the rear panel.
- unscrew the screws in the wheel arches and release the fender liners.
-unscrew one screw on each side that secure the corners of the bumper to the fenders.
-unscrew the screws that secure the lower part.
-pull the bumper back.

- 2
Tags: