-open the hood and unscrew the screws that secure the upper part (screwed from top to bottom).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, unscrew the screws that secure the fender liners to the bumper.
-unscrew the nuts behind the fender liners.
-unscrew the screws along the perimeter of the lower part.
-with an assistant, remove the bumper from the guides towards you.
- remove the connector from the fog lights (if any).
- if there are headlight washers, disconnect the hoses (to prevent the liquid from leaking onto the ground, you should prepare a special container).
Rear bumper
- open the trunk lid.
- unscrew the three screws in the trunk opening.
- unscrew the screws at the bottom (screwed from bottom to top).
-unscrew the plastic nuts in the wheel arches.
-remove the bumper from the guides towards you.
-remove the connector from the license plate light.

- 2
Tags: