How to remove the front and rear bumper of Renault Clio 2 (Symbol, Thalia) (1998-2005)

-open the hood.
-under the hood, take out the pistons (unscrew the screws) that secure the radiator grille.
-(until 2001) remove the radiator grille, pull out the caps under it and unscrew the screws.
-unscrew the screws along the perimeter of the lower part and take out the pistons.

-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches, unscrew the screws, take out the pistons and release the fender liners (no need to remove).
-behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.

-release the latches in the wings (pull the corners toward you)
-pull the bumper forward (make sure not to break the wires).
-remove the connectors from the fog lights (if any).

Rear bumper

-open the trunk lid.
-in the trunk opening, Unscrew the screws that secure the upper part.
-Unscrew the screws (twisted from bottom to top) that secure the lower part.
-in the wheel arches, unscrew the screws and release the fender liners.
-behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.

-release the latches in the wings.
-pull the bumper back (look at the wires).
- disconnect the connectors of the electrical equipment.
Tags: