How to remove the front and rear bumper of Renault Clio 3 (2005-2012)

-open the hood.
-under the hood, take out two pistons and Unscrew the two screws that secure the upper part.
- unscrew the screws (twisted from bottom to top) that secure the lower part.
-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches we take out the pistons and release the fender liners (no need to remove).

-behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.
-release the latches in the wings (pull the corners toward you)
-pull the bumper forward (make sure not to break the wires).
-remove the connectors from the fog lights (if any).

Rear bumper

-open the trunk lid.
-in the trunk opening, unscrew three screws on each side and remove the rear lights.
-Unscrew the trunk lid stops.
-Unscrew the five screws (twisted from bottom to top) that secure the lower part.
-in the wheel arches, unscrew the screws and release the fender liners (no need to remove).
-move the fender liners to the side and unscrew one screw on each side that secures the corners of the bumper to the wings.

-release the latches in the wings (pull the corners toward you).
-pull the bumper back (look at the wires).
-disconnect the license plate lighting connectors.
Tags: