Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws and nuts.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
The bumper is not as difficult to remove as it might seem at first glance.
-at the edges at the bottom of the bumper, remove the decorative grilles, for this you need to press the latches with a flat screwdriver.
-under the gratings, Unscrew the two bolts for the internal hexagon (there are under the asterisk), which are twisted from the bottom up and secure the bumper amplifier to the body (the location of the bolts is indicated by arrows).
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-Unscrew the screws that secure the fender liner to the bumper.
-at the edges at the bottom of the bumper, remove the decorative grilles, for this you need to press the latches with a flat screwdriver.
-under the gratings, Unscrew the two bolts for the internal hexagon (there are under the asterisk), which are twisted from the bottom up and secure the bumper amplifier to the body (the location of the bolts is indicated by arrows).
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-Unscrew the screws that secure the fender liner to the bumper.
Author: carsoftos777 | 26-03-2023, 15:39 | Programs for cars and diagnostics | Views: 2 212 | Comments: 0
Description: As you know, running HTTwin on a 64-bit system is very difficult. HTTWin is the very first diagnostic for Mercedes and all old cars are diagnosed only with it.
Today, a way to install and run the HTTWin program on a 64-bit system using NTVDMX64 is already available.
Today, a way to install and run the HTTWin program on a 64-bit system using NTVDMX64 is already available.
The bumper is removed along with the grille.
-under the hood take out the caps and remove the trim over the grille.
-Unscrew the screws under the trim (spun down).
-Unscrew the screws around the perimeter at the bottom (spun up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner.
-open the hood.
-under the hood, Unscrew the screws, take out the caps and remove the grille.
-under the hood, Unscrew the screws, take out the caps and remove the grille.
Author: carsoftos777 | 24-03-2023, 20:46 | Programs for cars and diagnostics | Views: 785 | Comments: 0
Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Bumper mounts. Arrows indicate screws and caps.
Depending on the year of manufacture, the attachment points differ slightly.
Despite the external differences (depending on the year of manufacture), the Renault Kangoo 1 (1998-2008) bumpers are mounted in approximately the same way and very simply. Everything will be clear from the images, and there is nothing special to describe here.
Depending on the year of manufacture, the attachment points differ slightly.
Despite the external differences (depending on the year of manufacture), the Renault Kangoo 1 (1998-2008) bumpers are mounted in approximately the same way and very simply. Everything will be clear from the images, and there is nothing special to describe here.
The bumper is removed very easily, and the whole job takes 10-15 minutes.
attachment points of the front bumper AUDI A4 B5-at the edges in the lower part of the bumper we remove the decorative grilles, for this we unscrew the bolts with a curly screwdriver and remove them from the latches.
-under the gratings, Unscrew the two hex bolts that are twisted from the bottom up and secure the bumper amplifier to the body (the location of the bolts is indicated by arrows).
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
attachment points of the front bumper AUDI A4 B5-at the edges in the lower part of the bumper we remove the decorative grilles, for this we unscrew the bolts with a curly screwdriver and remove them from the latches.
-under the gratings, Unscrew the two hex bolts that are twisted from the bottom up and secure the bumper amplifier to the body (the location of the bolts is indicated by arrows).
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
Author: carsoftos777 | 22-03-2023, 02:15 | Programs for cars and diagnostics | Views: 1 927 | Comments: 0
Depending on the year of manufacture, the attachment points differ slightly.
The bumper is easy to remove. We unscrew the screws in the wheel arches behind the fender liner (depending on the year of manufacture, the location changes), which fasten the corners of the bumper to the wings. We unscrew the screws around the perimeter of the lower part (spun up). With an assistant, we pull the bumper forward (we look so as not to break the wires). Remove the fog lamp connectors (if any).
The bumper is easy to remove. We unscrew the screws in the wheel arches behind the fender liner (depending on the year of manufacture, the location changes), which fasten the corners of the bumper to the wings. We unscrew the screws around the perimeter of the lower part (spun up). With an assistant, we pull the bumper forward (we look so as not to break the wires). Remove the fog lamp connectors (if any).