CASCADE 0.9.4 (CarmanScan 1 and HiScan Pro device emulator) + source code [2014]

Description: CASCADE - This is an emulator of a multibrand, automotive scanner Hi-Scan Pro (aka CarmanScan 1) allows you to run the software of this device on a PC and diagnose a car using an ordinary USB KL-Line adapter.
Hi-Scan Pro (aka CarmanScan 1) is a dealer-level scanner for KIA and Hyundai.
and is also a multibrand scanner for the following brands.
Asia: Toyota, Lexus, Honda, Nissan, Mitsubishi, Proton, Mazda, Subaru, Suzuki, Isuzu, Infiniti, Holden, Daewoo, Ssangyong
Europe: Benz, BMW, Audi, Volkswagen, Saab, Opel, Renault, Peugeot, Citroen
USA: General Motors, Chrysler, Ford.

Add. information:
No additional settings and manipulations are required. When launched, the program clings to the FTDI driver and automatically detects the type of interface (KL-Line or K + CAN).
WARNING: The developer strongly discourages using this software for reprogramming.
Note!
In the lower right corner of the program there is a K-Line field and below the pin number of the 16-pin OBD2 connector.
When the diagnostic program is started, the contact to which CarmanScan transfers the K line will light up green.
And since in any USB KL-Line or USB K + CAN / K + DCAN to the line is always displayed on the 7th contact, you will have to transfer the K line with the handles to the desired contact.
And how to do this already flight of thought of the diagnostician
Supported cars (tested)
Programs based on version 10B0.
New open source version of CASCADE 0.9.4.
Small fixes in the program. Improved display of current data for all brands.

Year / Date of Issue: 2014
Version: 0.9.4
System requirements: 800 MHz x 86 running Windows XP or Windows 7.
Universal USB interface KL-Line on FTDI chip (for vehicles with KL diagnostic line), or USB K + CAN / K + DCAN on FTDI chip (for vehicles with KL and CAN diagnostic line)
Interface language: English + Russian


Tags: